User manual QUANTUM QFLASH T5D SUPPLEMENT

[. . . ] Qflash 5d -- New Features These instructions supplement the Qflash 4d Operating Instructions for the additional features of Qflash 5d Qflash 5d models add several new features for wireless TTL operation. [. . . ] For details on Qflash settings, please see also the Dw series QTTL DEDICATED ADAPTER INSTRUCTIONS. On camera set up Remote flash set up FW9T, 10w QF5d FW31 cable Dw adapter FW7Q, 8R, 10w FW31 cable QF5d 5. 9. 8 Options with a FreeXWire FW7Q ZONE 1 ON RANGE 2 ON 3 ON 4 OFF HIGH When an FW7Q receiver is connected to the Qflash 5d, a third options menu becomes available. With this options menu you can activate the Zones and the Range setting of the FW7Q. Use the Up NORM or Down buttons to turn a Zone on or off. Changing the Range Press the Set button until the Range blinks. Note: If you are using wireless control, or wireless pre-flash TTL, use the NORM distance setting. 5. 9. 9 Options when used with an FW10 / FW10w (relates to Section 8. 1. 3) With an FW10/10w in the transmit mode (TX), a third options menu becomes available on Qflash. This menu is used for Wireless Control mode. R1 R2 In the Wireless Control mode ( Section 8. 1) data is sent from the control Qflash to the remote Qflashes. [. . . ] Remote flash 2 connected to an FW7Q or FW8R receiver -- no confirmation signal expected Remote flash 2 connected to an FW10 receiver -- expect a confirmation signal. Recommended settings : FW @ camera QF5d Fw31 cable Fw31 cable Dw adapter Flash set to Wireless Control Flash set to Wireless Remote 1 FW @ remote QF5d FW @ camera FW10 / FW10w FW9T FW @ remote FW10 / FW10w FW8R FW7Q FW10 / FW10w FW8R FW7Q Data confirmation setting R1 R1 R1 R1 R1 R1 P609A ________________________________________________________________________________________________________ 10 Commerce Drive QUANTUM INSTRUMENTS INC. Hauppauge NY 11788-3968 www. qtm. com [. . . ]