User manual QUANTUM PX720 DLTSAGE TAPE SECURITY QUICK START GUIDE 81-81588-02 A01

[. . . ] 2 Verify the secure password by entering the password a second time in the Verify Password box. The secure key password is updated. Creating a Secure Key To create a secure user: NOTE: Only users with administrator privileges (other than the default administrator) can create a secure user. There is only one Secure User and the username is always securekeyadmin. NOTE: Secure Passwords must be alphanumeric strings of at least one character. [. . . ] To modify the secure key used by the library: Figure 5 Enable/Disable Secure Key for Drives 1 Select the secure key name from the list of available names. NOTE: Selecting None to will cause the library to NOT use a secure key. The secure key can only be used with tape drives that are secure key capable. This section lists the tape drives in the library that are secure key capable. A checkmark in the Secure Key column indicates a secure key is enabled for the tape drive. 1 The secure key can be enabled or disabled for all tape drives by clicking the corresponding radio button. 2 Click the Secure Key check box for individual tape drives to enable/disable secure key for a tape drive. NOTE: The system must be offline to Enable/Disable Secure Key setting for drives. Assign Secure Key to Cartridge 0 Refer to figure 7 for information on Assign Secure Key to Cartridge. Figure 7 Assign Secure Key to Cartridge Modify Secure Key for Library 0 Refer to figure 6 for information on Modify Secure Key for Library. Click Find to list all secured cartridges and their assigned secure key names. To assign a secure key to a cartridge: 1 Enter the barcode of the cartridge. 2 Select a secure key name from the list of available names. 4 PX720 DLTSageTM Tape Security Quick Start Guide 1 Selecting Remove will remove the association between the cartridge and a secure key name in the cartridge database. 2 Click Update to accept the changes. Figure 9 Delete Secure Key Name Create Secure Key Name/ Secure Key Pair 0 Refer to figure 8 for information on Create Secure Key Name/Secure Key Pair. Figure 8 Create Secure Key Name/Secure Key Pair The Secure Key Names maintained on the library are displayed in one of three lists: · · To create a secure key name/secure key pair: 1 Enter the Secure Key Name. NOTE: The secure key name must be less than 12 characters, may include spaces, but cannot contain the following characters: ( ) = ; 2 Enter a securekey in the protected Secure Key field. NOTE: The Secure Key must be at least 8 characters and no more than 32 characters. Backup Secure Key File Delete Secure Key Name 0 0 Unused Secure Keys - keys not associated with any cartridges or tape drives currently in the system. Inactive Secure Keys - keys associated with cartridges in the library, or currently assigned to the library, but not assigned to any tape drives. [. . . ] NOTE: The user defined encryption key of the library originally maintaining the list is required to restore the file. To upload (restore) a Secure Key File: 1 Enter the encryption key of the original library. 2 Enter the path and file name of the file to be uploaded (click Browse. . . ) 3 Click Upload button. A progress window is displayed indicating when the upload is complete or if any errors occurred during the upload or restoration of the file. 6 PX720 DLTSageTM Tape Security Quick Start Guide Secure Key Maintenance Quantum strongly recommends that you backup your secure keys whenever a new key is added (see Backup Secure Key File). [. . . ]