Detailed instructions for use are in the User's Guide.
[. . . ] Quantum|ATL PowerStor L500 Series Tape Library
User's Guide
6321100-03 Ver. 3, Rel. 0
Quantum|ATL PowerStor L500 Series Library User's Guide, 6321100-03, Ver. Quantum|ATL provides this publication "as is" without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum|ATL may revise this publication from time to time without notice. [. . . ] The OCP consists of an LED display and four push-buttons: · · · · Previous--return to a previous option Next--advance through each option Select--return to the main menu options Enter--enter and execute commands in the current option
The LED display displays two lines of characters. Figure 23 shows the OCP buttons. ; table 3 describes the menu structure for the OCP LED display.
LED display
Figure 23 OCP
PREVIOUS SELECT
NEXT
ENTER
34
Quantum|ATL PowerStor L500 Series Tape Library User's Guide
Chapter 3 Basic Library Operations OCP Functions
Table 3 OCP LCD Menu Structure
OCP Main Menu
OCP Submenus
STATUS?
· Library Init/Active/Idle (at POST) · Slot Status 0-13 (displays status of all
slots)
· Drv 0, Drv 1, Drv 2 (displays tape
drive status)
EJECT/UNLOCK?ejects cartridge from each
drive and returns it to its respective slot (if a drive has a cartridge in it)
· Unlock Door?unlocks the door after the
tape is ejected from each drive and returned to its respective magazine slot)
EJECT/UNLOCK?If cartridge is not present, Drive is Empty is displayed.
· Eject Drive?ejects the cartridge from
the drive and returns it to its slot (if the drive is loaded and Mode/ SetUnloadCart is enabled)
· Unlock Door unlocks the door either
after the cartridge is ejected from the drive (if Mode/SetUnloadCart is enabled), or without ejecting the cartridge from the drive (if Mode/SetUnloadCart is disabled)
LOAD?
· Load Slot # To Drive #?loads
cartridge from selected slot
· From Slot # (loads cartridge from
selected slot)
Quantum|ATL PowerStor L500 Series Tape Library User's Guide
35
Chapter 3 Basic Library Operations OCP Functions
OCP Main Menu SCSI ID?
OCP Submenus
· View ID (displays drive and library SCSI
IDs).
· Set Drive ID (sets drive SCSI ID) · Set Lib ID (sets library SCSI ID) Mode?· Random loads any cartridge from any
magazine slot
· Sequential autoloads cartridge from low
to high magazine slot once
· Sequential Circ autoloads cartridge
from low to high magazine slot repeatedly
· Autoload Cart (Y/N) (enable for Seq/
SeqCirc modes)
· EnableBarcode (Y/N) · AutoClean (Y/N) *NOTE: Requires V34+ firmware · SetUnloadCart* (Y/N) enable to
unload tape drives and return cartridges to respective bins when Unlock Door?command is given.
36
Quantum|ATL PowerStor L500 Series Tape Library User's Guide
Chapter 3 Basic Library Operations OCP Functions
OCP Main Menu INFORMATION?
OCP Submenus
· Loader HW Rev (device rev level in
decimal)
· Loader FW Rev (firmware rev level in
decimal)
· Loader Mech Rev (loader rev in
decimal)
· Library HW Rev (device rev level in
decimal)
· Library FW Rev (firmware rev level in
decimal)
· Drive # FW Rev (drive firmware rev
level in hex)
· Loader Life Cycle Count (count from
completion of loader 1 POST)
· Current Cycles (from completion of
POST)
CODE UPDATE
Drive # (starts the code update process) Update Drive (installs microcode from code update tape into a drive)
TESTS
· Elevator Test · Load/Unload Test · Long Ld/Unload Test
Quantum|ATL PowerStor L500 Series Tape Library User's Guide
37
Chapter 3 Basic Library Operations OCP Functions
Table 4 OCP Button Descriptions
OCP Button
Description Commands the library to:
PREVIOUS
· Cycle backward within the main menu options · Cycle backward within a submenu
Press repeatedly to return to the desired display.
NEXT
Commands the library to:
· Proceed to the next main menu option · Proceed to the next submenu option
Press repeatedly to cycle forward through the desired displays.
SELECT
Commands the library to:
· Advance through the main menu options: STATUS?, EJECT/UNLOCK?, LOAD?, SCSI ID?, MODE?, INFORMATION?, CODE UPDATE?, and TEST?
Press the Select button repeatedly to reach the option.
· Escape out of a submenu and return to the
main menu
ENTER
Commands the library to:
· Enter an OCP main menu or submenu option · Execute a command
38
Quantum|ATL PowerStor L500 Series Tape Library User's Guide
Chapter 3 Basic Library Operations Status
Status
When the system is first powered on, it conducts a power-on selftest (POST). Upon completion of the POST, the drives and the library are initialized. The following messages are displayed: · · · Library Init Library Active Library Idle
3 The STATUS?option displays tape drive and magazine slot status.
If either status message, Library init or Library Active, appears on the LCD, the library is in the process of completing an activity. option gives status information only and there are no commands to be issued; therefore the ENTER button is not functional. options and their respective messages.
Quantum|ATL PowerStor L500 Series Tape Library User's Guide
39
Chapter 3 Basic Library Operations Status
Table 5 Status Options
Option Slot Status
Description Displays status of all magazine slots.
Message Cartridge Status: 0 67 13
Note
where: = cartridge present
0 1 2 = cartridge in drive 0, 1, or 2 = empty slot (dash) = missing m = in transit (cartridge in t
CHM) Drv 0-Drv 2 Displays tape drive status including tape drive error conditions and cartridge conditions. Status: COMP - If the last read or write operation was data compressed, COMP is displayed in addition to the status message. a
· Empty · InFlux (drive is becoming ready) · Cln (cleaning required) · Code Update (updating firmware) · Calibrating · Unloading · Loading · Cleaning · Erasing · Writing · Reading · Seeking · Rewinding · Idle
40
Quantum|ATL PowerStor L500 Series Tape Library User's Guide
Chapter 3 Basic Library Operations Status
Option Drv 0-Drv 2
Description Displays tape drive status including tape drive error conditions and cartridge conditions.
Message Error:
Note CLN - If the tape drive head requires cleaning, CLN is displayed in addition to the status message.
· Hardware Error · Comm Error · Library Error
Slot 0123. . . 13 Bar code: ___*
Displays specific slot status.
in Drive # Empty Full In transit Missing
If applicable, the second line of this message displays a bar code label entry.
a.
a. When using an unrecorded tape, the tape drive defaults to native tape density if a write from the beginning of tape (BOT) is executed. If you execute a write from the beginning of tape (BOT) when using an unrecorded tape, the tape drive defaults to native tape density. If you execute a write from the BOT when using a recorded tape, all pre-recorded data (and density changes) are lost. This includes density changes because they are established when writing from the BOT.
Quantum|ATL PowerStor L500 Series Tape Library User's Guide
41
Chapter 3 Basic Library Operations Eject/Unlock
Eject/Unlock
3 The EJECT/UNLOCK?option unlocks the library door and ejects a cartridge from the tape drive. Caution: Do not press PREVIOUS, NEXT, SELECT or ENTER until the backup or other tape operations are stopped at the host; pressing these buttons while other operations are executing may result in operation or drive failure. options and their respective messages.
Table 6 Eject/Unlock Options
Option
Description Unloads the cartridge from the tape drive and reports on drive status Ejects any cartridge that is in a drive then unlocks the library doors
Message
Notes The Eject function unloads the cartridge from the tape drive. [. . . ] In Wohnbereichen können bei Betrieb dieses Gerätes Rundfunkstörungen auftreten, in welchen Fällen der Benutzer für entsprechende Gegenmassnahmen verantwortlich ist.
ATTENTION!
5 Ceci est un produit de classe A. Dans un environment domestique, ce produit peut causer des interférences radioélectriques. Il appartient alors à l'utilisateur de prendre les mesures appropriées.
NOTICE FOR USA AND CANADA ONLY
5
If shipped to USA, use the UL LISTED power cord specified below for 100-120 V operation. If shipped to Canada, use the CSA CERTIFIED power cord specified below for 100-120V operation.
Plug Cap Parallel blade with ground pin (NEMA 5-15P configuration)
96
Quantum|ATL PowerStor L500 Series Tape Library User's Guide
INDUSTRY CANADA (DIGITAL APPARATUS) Interference-Causing Equipment Standard ICES-003 Issue 2
Cord
Type: SJT, three 16 AWG (1. 5 mm2) or 18 AWG (1. 0 mm2) wires
LengthMaximum 15 feet (4. 5m) RatingMinimum 10 A, 125 V
ATTENTION
5
LIRE LA REMARQUE DANS LE MODE D'EMPLOI.
REMARQUE
5
CETTE REMARQUE NE CONCERNE QUE LES ÉTATS-UNIS ET LE CANADA. [. . . ]