User manual QUANTUM DLT1HPUX800904
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual QUANTUM DLT1HPUX800904. We hope that this QUANTUM DLT1HPUX800904 user guide will be useful to you.
 |
QUANTUM DLT1HPUX800904 : Download the complete user guide (91 Ko) |
Manual abstract: user guide QUANTUM DLT1HPUX800904
Detailed instructions for use are in the User's Guide.
[. . . ] DLTTM TAPE UNIT INSTALLATION
HP® 9000 Series 800 System
HP-UX® 9. 04
Installation
Instructions will cover the installation of the DLT tape peripheral hardware and configuration of the system to communicate with the DLT tape peripheral. [. . . ] Before you install the patch, make sure the system has tape2 tape device driver included in the kernel. Install the DLT tape peripheral and connect it to its SCSI controller. Refer to the following manual for switch and jumper settings and SCSI bus termination:
·
DLT1/DLT7 Install and Operations Guide
Set the DLT SCSI device address to an unassigned ID. · · · ·
Turn power on and boot the system. Enter the following command to unpack the patch:
sh <PATCH>
<PATCH>is the patch file name.
·
To complete the patch installations, follow the instructions as described in /tmp/<PATCH>. text. Once the patch is installed, the installation will be complete.
Files /tmp/<PATCH>. text and /etc/newconfig/DLT. README may contain additional information regarding DLTtape device verification and use. [. . . ] Refer to the DLT1/DLT7 Install and Operations Guide for detailed description of these access modes. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE QUANTUM DLT1HPUX800904
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual QUANTUM DLT1HPUX800904 will begin.