User manual QUANTUM DLT PERSONALITIES 2

[. . . ] Quantum Corporation DLTtapeTM Application Note _____________________________________________________________________________________________ DLTTM OEM/OML/OMX FIRMWARE PERSONALITIES This application note is to be used only as a guideline for the titled subject. The user assumes all responsibility for understanding the interrelationships of this information with other affected software or system products. [. . . ] The OML firmware personality is represented by a value of 0Fh and the OMX firmware personality is represented by a value of 12h. In general for OEM choices, OEM-1 is the recommended personality for DLT tape drives. Personality Type OEM Sub-Personality Description 1 This personality is an OEM-based ANSI SCSI-2 variation. This personality is an OEM-based ANSI SCSI-1 variation and is used only for those applications that require SCSI-1 features. This personality is an emulation of the IBM 7208, Model 2 and is used only for DLT tape unit installation on an AS/400. This personality is the standard SCSI-2 implementation with one-way communication protocol over RS422 port. This personality allows DLT emulation of SCSI-2, 8mm tape drive (EXB-8505) when attached to HP9000/800 systems. Although provided for backward compatibility, OEM-1 is recommended over this code. This personality allows DLT emulation of HP 7980S when attached to HP9000/800 systems. Although provided for backward compatibility, OEM-1 is recommended over this code. [. . . ] OMX 1 This personality is identical to OML-1 except for the addition of a 3 second unload delay. OMX 2 This personality provides support for DLTstorTM 114 Loaders. Copyright 1999-2001 Quantum Corporation or its subsidiaries or affiliates. [. . . ]