User manual QUANTUM DAT 160 SCSI QUICK START GUIDE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual QUANTUM DAT 160 SCSI. We hope that this QUANTUM DAT 160 SCSI user guide will be useful to you.
Manual abstract: user guide QUANTUM DAT 160 SCSIQUICK START GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] DAT 160 SCSI and USB Tape Drives
Contents
Tabletop and Internal Tape Drive Quick Start Guide
English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The in-box software provides full support for all the features of your tape drive.
DAT 160 USB External Tape Drive Installation
Tech Tip: For detailed, step-by-step installation instructions see the User Guide found on the Quantum CD supplied with your tape drive. See www. quantum. com/support for detailed compatibility information.
Figure 3 Quantum DAT 160 USB External Tape Drive
Windows Systems Only
Drivers are available at www. quantum. com/support.
Installing the Drive
You must connect to a dedicated USB 2. 0 port on your computer. The drive is not powered from the USB bus (see figures 4).
Figure 4 Quantum DAT 160 USB External Tape Drive Back View
USB cable to computer
Power switch
Power cable
4
Completing the SCSI Installation
DAT 160 SCSI and USB Tape Drives
DAT 160 USB Internal Tape Drive Installation
Caution: Disconnect your computer from the main power supply before installing the tape drive and observe anti-static precautions.
Use the appropriate power cable to connect to the computer's power supply. Tech Tip: For detailed, step-by-step installation instructions refer to the User Guide found on the Quantum CD supplied with your tape drive. See www. quantum. com/support for detailed compatibility information.
Windows Systems Only:
Run the driver installer from the CD-ROM before connecting tape drive.
Check Server Schematic for Internal USB 2. 0 Port.
You must connect to a dedicated USB 2. 0 port on your computer. Use the schematic on the inside of the door or consult your computer documentation to locate the availability and position of a USB 2. 0 port; this may be a 4-pin motherboard connector or standard USB socket. Use appropriate cables, as appropriate (A) No internal port available?Use the Cable Routing Kit (B) to connect to an external USB port.
Attach USB Cable to Internal USB 2. 0 Port
There are two types of internal USB cables. [. . . ] Quantum, the Quantum logo, and all other logos are registered trademarks of Quantum Corporation or their respective owners.
81-81795-01 A01
81-81795-01 A01 March 2007 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE QUANTUM DAT 160 SCSI
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual QUANTUM DAT 160 SCSI will begin.