User manual QUANTUM ADIC MANAGEMENT CONSOLE 4.4 REV 03-2007

[. . . ] User's Guide ADIC Management ConsoleTM 4. 4 Scalar i2000 ADIC Management Console User's Guide, 6-00064-08, March 2007, Made in USA. Quantum Corporation provides this publication "as is" without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation may revise this publication from time to time without notice. Making copies or adaptations without prior written authorization of Quantum Corporation is prohibited by law and constitutes a punishable violation of the law. [. . . ] 1 Right-click an appliance in the navigation panel or the graphical panel. If you replace the appliance and do not load the saved configuration, you might not be able to use the storage devices attached to it or you may lose data. CAUTION 2 3 4 5 6 Select the Configuration menu, then select Load a Local File. If your local file was saved to the default location, double-click the "cfg" subfolder. Right-click the appliance for which you've just loaded the configuration, either in the navigation panel or in the graphical panel. Restarting. . . Please Wait appears in the Status/Message Area. Loading a Configuration File from the Server Save copies of your configuration both on the server and in a location that can be accessed if the server is unavailable. 1 2 Right-click an appliance in the navigation panel or the graphical panel. Select the Configuration menu, then select Load from Server. ADIC Management Console User's Guide 59 3 4 Select the file you want to load. Select Load to continue with the load. Updating Firmware The Update Firmware command can only be used on appliances. To update firmware on a device attached to an appliance, refer to Managing a Device on page 68. Note 1 2 To update firmware on any component of an i-platform library, refer to the documentation for those systems. Stop all I/O to the appliance. Log on as SAN administrator, portal administrator, or power user. Note Basic users are not authorized to upload firmware. If the portal administrator or power user have access to a portal with only partial access to the appliance for which firmware is to be uploaded, only the SAN administrator can upload firmware. 3 4 5 6 7 8 Right-click an appliance in the navigation panel or the graphical panel. If the firmware file you want is not in the default folder, navigate to the correct folder. A message posts to the Status/Message Area when the firmware upload is complete. You are prompted to restart the appliance. 9 Restart the appliance. Refer to Using Restart. Using Restart Use the Restart command after updating firmware, or making changes to the device map, channel zoning, SFM, or VPS configurations. Log on as SAN administrator, portal administrator, or power user. Note Basic users are not authorized to restart an appliance. If the portal administrator or power user have access to a portal with only partial access to the appliance that is to be restarted, only the SAN administrator can restart the appliance. 3 4 Right-click an appliance in the navigation panel or the graphical panel. A warning is displayed. 60 Performing Administrative Tasks 5 Select Yes to continue. Restarting. . . Please Wait appears in the Status/Message Area. Getting Information About a Library Scalar Library RMU data can be accessed by right-clicking the library and selecting the Show RMU Data command. For more information about displaying RMU data, refer to Displaying RMU Data. Note I-platform libraries do not have RMUs. Displaying RMU Data Not all appliances in the SAN are capable of providing this data. If the appliance you select is not capable of communicating this information, Show RMU Data does not appear on the appliance menu. 1 2 Right-click an appliance in the navigation panel or the graphical panel. [. . . ] It appears when a SCSI channel is right-clicked from either the tree panel or the graphical panel. Serviceability A RAS attribute that refers to a component that is designed to accurately diagnose and report failures, as well as minimize downtime in a storage solution. SFM (Scalar Firewall Manager) A virtual LUN mapping scheme for Fibre Channel hosts, allowing an overall LUN total of 2048 devices to be virtually remapped on a SAN-wide basis. SNC (Storage Network Controller) Term for a storage networking appliance. [. . . ]