User manual QUAD SYM QUADLANDER 250

[. . . ] CONTENTS CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 USE GENUINE SPARE PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CONTROL LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SAFE RIDING PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] USE OF EACH COMPONENT Gearshift lever 1 The gearshift lever has three position: Forward (F)Neutral (N)Reverse (R). Neutral (N) Use neutral when you start the engine, or if it is necessary to stop briefly with the engine idling. Forward (F) Use this position for normal riding. Reverse (R) Use this position to ride in reverse. If you need to ride in reverse, make sure the area behind you is clear and only operate the ATV at low speed. CAUTION: Improperly operating reverse could cause you to hit an obstacle or person behind you, resulting in serious injury. Make sure there are no obstacles or people behind you before selecting reverse gear. USE OF EACH COMPONENT Gearshift lever 2 1. Bring the vehicle to a complete stop, then make sure the transmission is in neutral. 4. Correctly to catch the rod to disperse into to the R files. CAUTION: If the gearshift lever is moved while the vehicle is moving, the sub transmission may be damaged. If the gearshift lever is moved while the engine revolution is over 3200rpm, the engine will stop revolving to protect the sub transmission. Please always keep the gearshift lever in `N' position when ATV is stop moving. USE OF EACH COMPONENT Seat removal (1) 1. Pull the seat lock lever(1) at the Underneath of the seat. USE OF EACH COMPONENT Fuel tank cap (3) (2) (1) (1) Fuel fill cap (2) Breather tube (3) Fuel gauge FUEL INSPECTION Turn main switch key to "ON" position, and check fuel gauge's needle range to make sure there is enough amount of fuel in the fuel tank. This engine is designed for using the unleaded fuel of Octane 90 or above. Firmly secure the main stand on the ground, shut off the engine and keep flames away from the motorcycle when refueling. Fuel tank capacity 7. 8liters, the red line area oil mass is 2 liters 32 5. USE OF EACH COMPONENT Brake (1) (2) (3) (1) Rear brake lever The rear brake lever is used to slow or stop your ATV . To operate, pull the lever. (2) Front brake lever The front brake lever is used to slow or stop your ATV . To operate, pull the lever. (3) 4W brake pedal The rear brake pedal is used to slow or stop your ATV . To operate, depress the pedal. Avoid unnecessary sudden braking as this may lead to the wheels locking and the ATV going out of control. Avoid applying the brakes continuously for a long period of time because that may overheat the brakes and reduce its braking efficiency. Slow down and brake early when riding in rainy days on slippery roads. Never apply the brakes suddenly to prevent the wheels locking and sliding. 33 5. USE OF EACH COMPONENT Parking brake (2) (A) (1) (1) Lock lever (2) Front brake lever/parking lever (A) To lock The lock lever(1)on the front brake lever(2)allows it to be used as a parking brake. To operate, first squeeze the front brake lever and then lock it with the lock lever. Before using parking brake, please make sure your ATV is parking on a flat surface. 34 5. USE OF EACH COMPONENT Rear cushion adjustment hard soft The front and rear suspension are both adjustable. It's set at 3rd stage when manufactured, and you can adjust it depending on your need. [. . . ] Generally speaking, the barometric pressure is insufficient the tire can wear unevenly, regarding holds controls as well as has many possibly can because the adverse effect which the heat so that damages. The barometric pressure excessively high tire, can cause you rides while ATV when to be able to cause the automobile body even more production to beat, and easily receives the damage and the non-uniform attrition because of the ground interference. TIRE INSPECTION · Tires should be checked and inflated with the engine shut off. · If a tire's ground contacting curve is abnormal, check it with an air pressure gauge and inflate it to the specified pressure to meet applicable standard before riding. [. . . ]