User manual QED VECTOR

[. . . ] Other companies and product names are the trademarks or the registered trademarks of each company. The MD Editor 2 allows you to control an MD deck from your personal computer. You can also use it to listen to CDs in your personal computer's CD-ROM drive*1 or in a Sony CD player*2 connected to the CONTROL A1 (or CONTROL A1) jack(s) of the MD deck. Enjoy easy recording by performing a drag and drop from a CD to an MD. [. . . ] ) Video board and display driver: VGA (640 × 480 pixels), 65, 536 colors or more displayable. Hard disc space: 20MB or more (When installing both MD Editor 2 and Label Maker. ) CD-ROM drive Serial port: 1 or more OS : Windows 95/Windows 98 (This software does not run on Microsoft Windows 3. Set up the serial port that is to be used for this kit so that it is unavailable to the other softwares. To verify that the serial ports of your computer are enabled, call the vendor of your computer. Check to make sure that you have received the following supplied items with the MD Editor 2. If anything is missing, please contact the shop where you purchased this unit or your nearest Sony dealer. Connection for controlling the MD deck from your computer Use the supplied connector and monaural (2P) mini-plug cord to connect your personal computer to the MD deck. Match the orientation of the connectors and insert the plug deeply into the matching connector then secure the plug with the retaining screws on both sides of the plug. Different brands of personal computers refer to their RS-232C serial terminals with different terminal names. For further information, refer to the instruction manual of your computer. If you do not need the MD Editor 2, Label Maker, or Adobe Acrobat Reader, uninstall the software as follows: " Uninstaller starts up and the software selected in step 3 is deleted automatically. If you uninstalled the Label Maker from the computer in which the PictureGear software is already installed, it become impossible to print labels through the PictureGear as well. If the softwares listed below are already installed in your computer, do not start them up while the MD Editor 2 is active. softwares for controlling the MD deck · MD Editor Supplied with the PCLK-MD1 personal computer connecting kit, or the MD deck MDS-PC1 which includes a personal computer connecting kit. Starting up the MD Editor 2 with any of these programs active will result in a malfunction. If you are using several CD-ROM drives, you may need to select the drive to be used for playing music CDs before starting up MD Editor 2. Selecting the CD-ROM drive 1 On the desk top, double-click "My Computer, " double-click "Control Panel, " and then double-click "Multimedia" to display the "Multimedia Properties" window. 2 Click the "CD Music" tab and select the CD-ROM drive to be used for music CD playback. Starting up the software for the first time This software is then started and the MD Editor 2 Main Bar appears. When you start the software, the following display appears: On the serial port selection dialog box, select one of options COM1, COM2, COM3, and COM4 that is available for your computer. Set up the serial port that is to be used for this kit so that it is unavailable to the other software. [. . . ] If you experience any of the following difficulties while using this software, use this troubleshooting guide to remedy the problem. Please also refer to your computer's manual, as well as the "Readme. Cause/countermeasure Another application may be using the serial port. You selected a port that is not available on your computer during serial port setup. [. . . ]