User manual PYLE PWMA120

[. . . ] The openings should never be blocked by placing the Video Cassette Recorder on a bed, sofa, rug, or other similar surface. The Video Cassette Recorder should never be placed near or over a radiator or heat register. This video product should not be placed in a built-in installation such as a book case or rack unless proper ventilation is provided. Power Sources-The Video Cassette Recorder should be operated only from the type of power source indicated on the marking label. [. . . ] The VCR is for 12Volt negative ground vehicles only. 5 FRONT PANEL-CONTROLS AND INDICATORS 1 REC DEW /HEAT Hi-Fi 13 2 3 4 5 6 7 8 9 10 11 12 1. Cassette Compartment The power is on automatically when the cassette is inserted even if the power was off. When the cassette is inserted, Auto Tracking Adjustment operates automatically. 2. Power Key When power is supplied to the set, the power indicator lamp will always light up in red. When the POWER is switched on, the power lamp will light up in red the other keys will light up in green. 3. Cassette-In Lamp When the cassette is inserted, the CST-IN lamp will light up in green. 4. Rewind / Review Key If this key is pressed in the PLAYBACK mode, the VCR enters the reverse picture search mode, and "REW" indicator lamp will be blinked. If pressed in STOP mode, then the tape will rewind at high speed, the indicator lamp will up in red. 6 7. Play / Re-AutoTracking Press this key to playback a recorded tape, or to release special operation such as the search mode. In the playback mode the playback indicator lamp will be light in red, and Auto Tracking mode, this indicator lamp will blink. When the playback picture is noisy, press this key to operates Re-Auto Tracking. 8. TRACKING -, + (Manually Tracking in playback mode) / CHANNEL -, + ( in TV or CATV mode) 5. During the Hi-Fi STEREO tape playback mode, you can select the audio out channel. "Hi-Fi Hi-Fi "L" Hi-Fi "R" Mono Hi-Fi " 11. When the playback picture is noisy, this "RE - TRACKING" key will control the playback picture quality automatically. This switch is functioned only when RF OUT connects to TV antenna Input with setting of the TV channel 3 or 4. 10 SETTING THE MENU Setting the OSD (On Screen Display) MENU OSD AUTO PLAY AUTO REPEAT RECORD SPEED VCR OUTPUT CH INPUT SIGNAL SHIFT: SEL: ON ON ON EP CH3 TV END:MENU 1. On completion, press MENU key to exit the menu. Setting the Auto PLAY MENU OSD AUTO PLAY AUTO REPEAT RECORD SPEED VCR OUTPUT CH INPUT SIGNAL SHIFT: SEL: ON ON ON EP CH3 CATV END:MENU 1. Press shift key, until the cursor is placed in front of the "AUTO PLAY " option. On completion, press MENU key to exit the menu. Setting the Auto Repeat MENU OSD AUTO PLAY AUTO REPEAT RECORD SPEED VCR OUTPUT CH INPUT SIGNAL SHIFT: SEL: ON ON ON EP CH3 CATV END:MENU 1. Press shift key, until the cursor is placed in front of the "AUTO REPEAT " option. On completion, press MENU key to exit the menu. 11 Setting the Record Speed MENU OSD AUTO PLAY AUTO REPEAT RECORD SPEED VCR OUTPUT CH INPUT SIGNAL SHIFT: SEL: ON ON ON EP CH3 TV END:MENU 1. Press shift key, until the cursor is placed in front of the "RECORD SPEED" option. [. . . ] Pull the cassette out (unloading) and insert it firmly into the cassette compartment. Operation key does not work. If the cassette or the VCR is not in normal condition, every indicator LED/LAMP lights up and the VCR does not work. Safety device works to protect the cassette when it is inserted incorrectly. No 12V DC. Cassette is ejected upon inserting Audio output does not change to Hi-Fi mode. [. . . ]