User manual PYLE PWD303 INSTALL GUIDE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PYLE PWD303. We hope that this PYLE PWD303 user guide will be useful to you.
 |
PYLE PWD303 INSTALL GUIDE: Download the complete user guide (60 Ko) |
Manual abstract: user guide PYLE PWD303INSTALL GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] GREEN/WHITE wire has a 0. 8 sec negative (-) pulse upon remote starting. [. . . ] If connection to an alternator is required, connect to detect +12V when the engine is running and 0V when the engine is stopped. Jumper selection Jumper 1 2 function first cranking time engine running detection ON * 0. 75 sec. from alternator
Note: * Factory default setting.
* Ensure power is removed from the module before removing or installing Jumpers
5. Do not try to remote start until the following steps have been checked.
Turn the ignition switch to ON (do not start the engine). Open the door and check that the LED is flashing.
07-08-356-2
PWD303 - ADD ON STARTER
OPERATION GUIDE
PWD-303 is easy to use for vehicle equipped with an automatic transmission. Just press the button on transmitter and vehicle will start after 6 sec. [. . . ] If remote engine starting fails, system will automatically re-crank up to 5 times, each re-try 0. 25 sec will be added to the crank time.
07-08-355-3 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PYLE PWD303
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PYLE PWD303 will begin.