User manual PYLE PWD206

[. . . ] PWD206 - TRANSPONDER IMMOBILISER OPERATING INSTRUCTIONS Overview The PWD206 is a safety device using the most advance technologies of transponder chip that allow a user to start his vehicle only after presenting a transponder tag to a hidden coil (loop antenna). [. . . ] If the user does not switch ignition on within 5 seconds, the LED will flash rapidly, and the system will auto re-arm after 15 seconds. User Transponder Tag Coding/Deleting (5 codes available) 1. Turn the ignition key to OFF/ON 5 times (OFF-ON, OFF-ON, OFF-ON, OFF-ON, OFF-ON), keep ignition key at ON position. hold 1st user tag to loop antenna area until LED flashes once and 1 beep. The system will delete previously existed user tags from memory since new 1st user tag has been learned. hold 2nd user tag to loop antenna area until LED flashes twice and 2 beeps. hold 3rd user tag to loop antenna area until LED flashes three times and 3 beeps. hold 4th user tag to loop antenna area until LED flashes four times and 4 beeps. hold 5th user tag to loop antenna area until LED flashes five times and 5 beeps. [. . . ] If you miss the OFF/ON sequences, turn ignition key to OFF and wait for 5 seconds, then repeat the procedure. 07-08-357-1 [. . . ]