User manual PYLE PT660A

[. . . ] Do not touch any of the inside parts. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER( OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICI NG TO QUALIFIED SERVICE PERSONNEL. The lighting flash with arrowhead symbol, within an equilateral, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Do not block the ventilation holes Do not block the ventilation holes on the top of the unit by placing records or other objects over them. This will increase the inside temperature may lead to a failure or malfunction. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARMING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture. Installation precautions Do not install the unit in any of the following locations since this may result in deterioration in performance of malfunction: Locations exposed to direct sunlight or near objects radiating heat such as heating appliances. [. . . ] 32. Timer 3 Min Hour Time up, down Set Clock Mute Balance Set Clock/Timer Resume Balance Timer 2 12/24 Hour Disp. Clock Timer 1 5 Amplifier Operations Mic Level Volume (6) Adjust the microphone level by rotating the Mic Level Volume knob. Mic Jack (8) Insert Microphone plug here to enjoy karaoke or to record the voice message in the cassette tape. Source Selection Tuner (9) Select the TUNER button if you want to connect to the TUNER terminals. CD (10) Select the CD button if you want to play compact disc from the CD terminals. Tape (11) Select the TAPE button if you want to connect to the cassette deck terminals. Video (12) This switch is pressed when you want to listen to the audio signal from the video equipment connected to the "Video 1" terminal. Aux (13) This switch is pressed when you want to listen to the audio signal from the equipment connected to the "Aux" terminal. Phono (14) This switch is pressed when you want to listen to the records on the turntable connected to the PHONO terminals. Tone Control Tone Control Treble Volume (15) The treble sound is emphasized when the TREBLE knob is rotated clockwise from its center position while it is attenuated when the knob is rotated anti-clockwise. Tone Control Bass Volume (16) The bass sound is emphasized when the BASS knob is rotated clockwise from its center position while it is attenuated when the knob is rotated anti-clockwise. Enable Alarm Function Timer (20) Timer 1 (32), Timer 2 (29), timer 3 (20), Timer Off (5) 1. eg. ) If TIMER lights up and it is set to "AM 7:00" then the amplifier will turn on at that time. Timer 2: The amplifier will automatically turn off at the preset time. eg. ) I f TIMER lights up and it is set to "PM 10:30" then the amplifier will turn off at that time. Timer 3: The amplifier will automatically turn on and off at the preset time. eg. ) If TIMER lights up , then the amplifier will turn on at "AM 7:00" and will turnoff at "PM 10:30". 3 4 Timer Off All Timer Off 6 Amplifier operations MIN (21) In clock adjust or Timer adjust mode, when this button is pressed, the min can be calibrated. HOUR (22) In clock adjust or Timer adjust mode, when this button is pressed, the hour can be calibrated. Set Clock (24) The clock can be adjusted when this button is pressed in tuner mode. 12/24 Hour Display (30) The timer display can be toggled between 12 hour and 24 hour by using this button. [. . . ] PTY (It will be available if the unit has tuner with RDS. ) APS ( it will be available if the unit has tuner) Auto program search. 9. 14. 9 Troubleshooting Guide If you have a problem with your PA-3039, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer for services. Symptom Possible cause Action No sound is heard when the power is The power cord plug is not completely Confirm that the power cord plug is turned on. [. . . ]