User manual PYLE PLVW1770IR

[. . . ] Usage Notice ---------------------------------------------------------- 2 4. Package ---------------------------------------------------------------- 3 5. [. . . ] Do not attempt to open or disassemble the LCD monitor yourself as this may cause electronic shock. When there is smile or peculiar smell in use, unplug the power cord immediately and send it to your local dealer or our service center. When there is damage or breach on the LCD monitor casing, send it to your local dealer or our service center. Do not use this LCD monitor in the areas susceptible to excessive dust, dirt, and humid. Do not setup the LCD monitor in direct sunlight, extremely hot, and cold environment. Do not expose the LCD monitor to rain or moisture. 2 Package This LCD monitor comes with all the items below. Contact your dealer immediately if anything is missing. * 17" High RES TFT-LCD Wide Screen Monitor * Overhead Console Mounting Bracket * Credit Card Size Remote Control with Batteries * Interface Cable with RCA jacks for Audio / Video Connection and 12V DC * User's Manual * Warranty Card User Control Overview * Panel Control IR POWER MENU UP DOWN MUTE 3 Function Descriptions * Power: * Menu: You may also turn on or off the monitor by this "Power" button. When in sub-menu, press "MENU" again to go back to the main menu. Make item selection in OSD menus to increase or decrease parameters as well. Press the "Mute" button from the remote control to still the sound of the LCD monitor. * +/- Keys: * Mute: Start Your Installation * Monitor connection 2P CAR POWER CABLE BLACK(-) CAR INDOOR LIGHT CONTROL SW RED(+) 5M POWER CABLE FUSE IR SIGNAL FOR TUNER BLACK (OPTION) WHITE RED YELLOW AUDIO ( AV1 IN ) VIDEO 9 PIN MINI DIN (SIGNAL CABLE) WHITE RED YELLOW AUDIO ( AV2 IN ) VIDEO 4 Setting Up The Dome Lamps *Operating the dome Lamps 1. There are three function buttons for the Dome lamps operation: OFF, DOOR, and ON. ON: To turn on the lamps. DOOR OFF ON * The electric circuit figure OFF W B DOOR ON LAMPS R BATTERY + Point Power Cord Color R W B Red White Black Connection Connecting With Power Supply Connecting With Sensor of Car Doors For Ground Connection * Remarks: 1. There would be no any power cord puling out from "B" point as "B" have been connected with a ground connection by screws. Power supply should be used in 12 Voltages. 5 Installation your Monitor Take care to select a suitable fitting location and securing method for the monitor: *The unit should not distract or obstruct the driver. [. . . ] As shown # 2 in below figure) Change a new battery. 2 Battery Cassette Button 1 9 Specifications 1. System : NTSC M, N PAL SECAM Audio : 1. 0Vp-p Active Matrix High Resolution TFT-LCD Monitor Operating Temperature : 0 C~35 C Storage Temperature : -20 C~ 60 C Humidity : 20% ~ 90% 2. [. . . ]