User manual PYLE PLVG7IR

[. . . ] Connect the cable with YELLOW RCA jack to Video Input sources for your Video Program material. In case of Video Output, connect an RCA-RCA cableon the interface cable box. 3 2. FUNCTION KEYS 2. 1 FRONT PANEL OF FUNCTIONS 2. 2 FUNCTIONS OF REMOTE CONTROL POWER MENU Up/Dn , , Inc/Dec Press the POWER button once it will be power ON. [. . . ] FUNCTION KEYS 2. 1 FRONT PANEL OF FUNCTIONS 2. 2 FUNCTIONS OF REMOTE CONTROL POWER MENU Up/Dn , , Inc/Dec Press the POWER button once it will be power ON. See OSD controls Press or to adjust Using On-Screen Display (OSD) Controls You can adjust the display settings using the on-screen display (OSD) program. 4 Navigating the Menu Press the Menu button on the front panel of the monitor to launch the OSD program. The OSD program contains four menus: Colour Picture Function OSD Menu Miscellaneous Exit Keep on pressing the Menu button to switch between the four menus While in a menu, press the Select button to highlight and select an option. When an option is selected, press the button or button to adjust the value. When you complete your settings, the OSD menu will automatically disappear after 15 seconds, and any changes you have made will be saved. Described below are the functions you can select and adjust in the OSD menu. Auto Adjust If set to YES, the values of the following items in this menu will be automatically adjusted to the most optimal settings. Auto Position If set to YES, it will adjust the 5 display area to an adequate position and fitting the full screen. Auto Phase adjusts the ADC sampling clock phase relatively to the source video Hsync signal. Use the + button or - button to choose: English, German, French, Italian, Spanish, Chinese traditional, Chinese simple and Japanese. Position moves the menu rightward (with the + button) or leftward(with the button). Position moves the menu upward(with the + button) or downward(with the - button). OSD Timer the default setting is YES; if no button pressed, OSD menu will fall away after 20 seconds later. Translucent default is Yes; means that OSD menu is translucent, can see through slightly. 8 3. Make sure the plug has 12V~14V, may use another electrical appliance to test it. 3. 2 NO FUNCTION OF REMOTE CONTROL 1. Make sure the remote control is aiming at the receiver, and there are no obstacles in between. Normal distance is within 7 meters. 3. 2 NO DISPLAY OR NOT CLEAR 1. [. . . ] Make sure the remote control is aiming at the receiver, and there are no obstacles in between. Normal distance is within 7 meters. 3. 2 NO DISPLAY OR NOT CLEAR 1. ACCES S ORIES PS2/CAR CABLE INSTALLAT ION BRACKET SCREW PACK REMOT E CONT ROL USER MANUAL 5. [. . . ]