User manual PYLE PLTVCP85

[. . . ] Accessories-Do not place the Video Cassette Recorder on an unstable cart, stand, tripod, bracket, or table. The Video Cassette Recorder may fall, causing serious injury to a child or adult, and serious damage to the Video Cassette Recorder. When used in vehicles, the Video Cassette Recorder must be securely fastened. Ventilation-Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the Video Cassette Recorder and to protect it from overheating. [. . . ] REC Key Press the REC key for at least one second to start recording. 10. DEW/HEAT Lamp When power is on, this indicator flashes red to indicate excessive moisture buildup inside the VCR. The unit will not operate unit it dries out sufficiently ( the tape can be ejected from the unit). When DEW mode has been activated, leave the unit on the allow it to dry out completely. 11. Hi-Fi Lamp In the Hi-Fi out mode, the lamp will light up in red. 12. Auto Repeat Lamp During Auto repeat operation, Auto Repeat lamp will light up in red. 13. Audio/Video In Jacks (AV2) Connect these jacks to the audio/video out jacks terminal of your game machine or camcorder using the RCA cord. For displaying this Front A/V lnput connected, Input Signal should be set to " AV2" in Menu setting mode. 7 REAR PANEL-CONNECTIONS AND POWER 6 1 2 34 5 7 1. AUDIO/VIDEO IN (AV1) Connector this terminal to VIDEO/AUDIO OUT terminal of your Game machine, Camcorder, Portable DVD Player, using the RCA cord For displaying this Rear A/V input connected, Input Signal should be set to "AV1" in Menu setting mode. AUDIO/VIDEO OUT Connect this terminal to VIDEO/ AUDIO IN terminal of your TV (or Amplifier/Monitor), using the RCA cord provided. IR INPUT Connect this terminal to Remote IR Sensor cable provided. 8 4. DC 12V IN JACK (Locking type) For car using, we recommend to use this connecter with 3-wire system. DC 12V IN JACK ( Round type) To use this connector, below Convert-Adapter accessory should be locked into above connector 4. ( Convert-Adapter) * Please note : We highly recommend to connect the unit corresponding to the 3-wire system of 4. Beyond it, the unit will automatically change to standby mode after turning off the vehicle in order to save the car battery. 6. ANT IN (TV/CATV) Connect the TV antenna (or cable if available- home use) to this connector. RF OUT This connectors provides an interface to the antenna input connectors terminal of your television using a coaxial cable. Set TV to channel 3 or 4 to watch video tapes. 9 REMOTE CONTROLLER 1. To watch the desired picture once more during playback, press "ENCORE" key . The VCR unit rewinds the tape for 5 seconds and will play the picture watch again. To watch the picture from start position of tape, press "REPLAY" key . TRACKING -, + (Manually Tracking in playback mode) / CHANNEL -, + ( in TV or CATV mode) 5. During the Hi-Fi STEREO tape playback mode, you can select the audio out channel. [. . . ] No backlighting at power button. Check circuit fuse at source of power (see vehicle/converter manual). Power cord unplugged from 12V outlet or at rear of unit. 15 SYMPTOMS Power indicated with backlighting-unit will not operate. CAUSE (Unit in dew mode) Dew feature activated (see instruction manual) POSSIBLE SOLUTIONS Retain power to recorder and allow unit for a time to get rid of moisture. (After 30 minutes if dew indicator is still on, completely switch power off from unit and resupply after a minute. This can reset dew indicator if moisture eliminated. ) Insert the tape. [. . . ]