User manual PYLE PLMD7 INSTALL GUIDE

[. . . ] [. . . ] In areas subject to extreme temperatures. FREQUENCY SELECTOR SWITCH 1234 Frequency(MHz) 87. 7MHz 87. 9MHz 88. 1MHz 88. 3MHz 88. 5MHz INSTALLATION The FM Stereo Transmitter must be mounted within 24inches of your radio so that its power cable can reach the radio power antenna lead. The FM Station Frequency Selector Switch is located in the face and you may wish to change it after your initial checkout or somtime in the future. 88. 7MHz 88. 9MHz SPECIFICATIONS: Frequency: 87. 7MHz to 88. 9MHz(7channel-200KHz Step) 60dB 65dB 40dB 75KHz at L+R+Pilot 10 V~16VDC 44R 123g Specifications and design are subject to change without notice FM RADIO FREQUENCY PRESET The FM Stereo Transmitter can operate on from 87. 7MHz to 88. 9MHz. (7channel-200KHz Step) The Frequency Selector Slide Switch is on one channel of the Transmitter and was set 87. 7MHz at the factory. Assuming it is still there, turn on the car stereo and select FM band operation. Tune the radio to 87. 7MHz ( depending on frequency to which the installer has set the unit), or push the pre-set memory button. RF Output Level: S/N Ratio: Stereo Separation: FM Modulation Depth: Operating Voltage: Dimensions: Weight: Max 23Hmm [. . . ] [. . . ]