User manual PYLE PLCD70MUBT

[. . . ] When receivable stations are tuned in, they are monitored for approximately 5 seconds before advancing to the next receivable station. PRE-SCAN/AUTO-STORE BUTTON This button allows you to enjoy "Preset Memory Scan" function by pushing it shortly, and "Auto-Store Memory" function by pushing it more than 2 seconds. * * PS (PRESET MEMORY SCAN ) - It calls the memorized station frequencies ( from 1-6 ) automatically every 5 seconds. AS (AUTO-STORE MEMORY ) - It searches all station frequencies upward and memorize automatically 6 stations by catching the frequency which has scan-stop level, the memorized station is shown on LCD as "CH1. . . 6". [. . . ] After memorizing, auto-store memory function will be changed to "Preset Memory Scan" function automatically. 2. 3. 4. 5. DISC SLOT Holding the disc and insert into the disc slot. LCD DIGITAL DISPLAY The unit utilizes a digital type display which shows numerical indication of station FREQUENCY and other FUNCTIONS. CLOCK CONTROL 6. 7. During radio and CD operation, press this button to call the time display on the incorporated quartz clock. SETTING CLOCK TIME 1. Press "+" button to set HOUR and press "-" to set MINUTE. STEREO/MONO CONTROL Press this button to select "FM STEREO" or "MONO" reception. EJECT BUTTON Press the button to eject the disc inside disc slot. 9. Page. 2 P / N : 570-C10603-02 10. PANEL RELEASE BUTTON This button is used to release the panel from the unit. To detach the front panel, press the button so that the left side of the panel is released. To re-attach the panel, insert the right side of the panel in place first and then press the left side of the panel until the chassis hold the panel firmly. MODE SELECTION Press this button to select Radio (TUNER), CD (S-CDP), or Auxiliary input (AUX) mode. Each preset button can store FM1, FM2, FM3, MW1, MW2 station frequency. Pressing the button momentarily recalls the station frequency which was memorized. There are 6 preset buttons, giving you capability of storing 18FM / 12MW. NOTE: When the preset button to be memorized is kept pressed for more than 2 seconds, the receiving station frequency will be stored in the button pressed. After this, the memorized station can be recalled by pressing the button once. On CD Mode · Preset 1 - press this button to pause the disc played. · Preset 2 - press this button to scan the first 10 seconds of all the tracks on the currently selected disc. · Preset 3 - press this button to repeat the current track of the disc. · Preset 4 - press this button to play disc at random order - Disc shuffle play. Page. 3 P / N : 570-C10603-02 WIRE CONNECTION RESET FUNCTION CAUTION : Do not connect the speaker wires to chassis or car body. [. . . ] · Preset 4 - press this button to play disc at random order - Disc shuffle play. Page. 3 P / N : 570-C10603-02 WIRE CONNECTION RESET FUNCTION CAUTION : Do not connect the speaker wires to chassis or car body. Otherwise, the unit will be damaged and no sound will come out anymore. The RESET button is located on the front of main panel. It is recessed in order to prevent accidental engagement, and can be activated with the tip of a ball-point pen or any similar pointed object. [. . . ]