User manual PUR LINE PRLA5M

[. . . ] Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended. To reduce the risk of electric shock, this plug is intended to fit in a correct outlet. if the plug of heater does not fit fully in the outlet , contact a qualified electrician. [. . . ] Note: If the power cord is damaged, it must be changed by a qualified electrician or the manufacturer to avoid any danger. Installation This appliance can be installed by two different ways: - Fixed installation (wall mounted) - Portable installation (optional set of wheels) 1) Portable installation : First turn the product, you will find two holes in the bottom that is fit for the screw for fixing the wheels. When you will open the gift box, you will find below elements to help you for the wall installation: The length of the paper guide corresponds to the distance between the two holes at the back of the appliance in which will be fitted the wall brackets (marked of a red arrow). The holes marked by a red arrow on the back of the panel are those to use for the wall brackets (the other holes are only used for ventilation and not for the wall installation. ) Please find below the detail of the wall installation in several points: Before taking your marks, please respect all below safety distances: The higher drilling of the wall bracket must be to 1200 mm minimum of the floor (distance C). The higher drilling of the wall bracket must be to 300 mm minimum on the right and left side of the wall (distance A). The higher drilling of the wall bracket must be to 300 mm minimum of the ceiling (distance B). By taking these safety measures for reference, mark with the pencil the location of the higher hole of the first wall bracket. You are useful of the guide paper to mark the higher hole of the second wall bracket by tightening paper well for good distance. Repeat the same operation for the lower holes of the two wall brackets. Once the holes of the wall bored, insert there the ankles in figure provided with the appliance (small plastic bag). - Then you can fix, using the large screws, the higher and lower holes of the wall bracket. Do not forget to put a disc (small plastic bag) between the screw and the bracket. - Once the wall brackets firmly fixed at the wall, you can suspend the appliance by the panel holes located at the back of the heater, those marked of a red arrow. [. . . ] Removal of used domestic appliances European directive 2002/96/EC on the Electric and Electronic Equipment Waste requires that domestic appliances not be thrown out together with the rest of municipal waste. Used devices must be collected separately in order to optimize recuperation and recycling rates of the materials that make them up and so reduce the impact on human health and the environment. The symbol of the crossed out garbage can appears on all the products to remind the obligations regarding separated collection. [. . . ]