User manual PUR LINE PACHA 21

[. . . ] Unpack the halogen heater making sure that all the items are present and that there are no components left in the box and that the heater head is free from any packing material. Using the detailed drawing follow the steps to assemble your halogen heater. Do not connect the halogen heater to the electrical supply until all the assembly is complete. [. . . ] The indication of the different positions of switches shall be visible from a distance of 1M. The Marking concerning covering shall be visible after the heater has been installed. The unit must be placed with the clearance of 100cm to the wall and 30cm to the ceiling. Don't place the unit closed to curtain and/or other flammable objects. Don't cover the unit with anything during operation or a short time after it's shut down. If the unit gets damaged, it must be repaired by professional electricians. When the power supply cord is damaged, it must be replaced by authorized agent or other professional people to avoid danger. It is not safe to install the unit by a swimming pool, in a bathroom or shower area. It is not safe to use on a building site, greenhouse, barn or stable where there's flammable dust. Don't use this unit in place where causticity or volatile air exists, i. The unit should be plugged in a socket, which is easily visible and reachable. Two Dark points may exist on the surface of the heating elements during the first few minutes after it is turned on. The Wheels are only for the purpose of moving the Heater, once the Heater is in the right position, the wheels should be removed for safety purpose. Operation Connect the power cable to a 13 amp supply that is located in a safe, dry area. [. . . ] To do this, align the small crew holes to the top of the Top Tube with the holes on the bottom of the heater head. Step 3: Connect the Middle Tube with Bottom Tube by screwing together. Step 7: Fix the Power Cord on the Rubber Base by using 4*15mmscrews. [. . . ]