User manual PUR LINE MOBY 100 ET

[. . . ] Installation of the exhaust pipe The unit is a portable air conditioner that may be moved from room to room. Feed exhaust hose through the foam strip and insert strip into window gaps as shown and slide window across so that foam is held securely. Note: Take care to maintain protection against intruders Cut a 151mm diameter hole in the wall or window. Feed exhaust hose through the window or wall and attach the threaded adaptor from the outside as shown. [. . . ] If the unit is in AUTO mode, it will choose the ventilation speed automatically according to the ambient temperature. Press TIMER button to set the operating hours you desired (1 to 24 hours, the sign of timer will light on). When the set time has been reached, the machine will turn off automatically. By pressing the timer but without turning on the other functions, you can PRE-SET the time for the machine to work. For example, if you press the timer to '2', the unit will work automatically after 2 hours. In cooling mode, by pressing the SLEEP button, the set temperature will increase 1oC at the 1st hour, another 1 oC at the second hour, then keeps at that temperature. In heat mode, by pressing the SLEEP button, the set temperature will descend 1oC at the 1st hour, another 1 oC at the second hour, then keeps at that temperature. Re-press the SLEEP button, the setting temperature and ventilation speed will return to the pre-selected one. The unit will shut down automatically after the SLEEP function running for 12 hours. Please note, the sleep function is not available while the machine is working in ventilation, dehumidification or auto mode. When the machine is in Sleep function, the Fan Speed would turn to be LOW speed. Swing function By pressing SWING button, the air vent will rise in 3 different angles: 45º 60º 75º Every time when you turn on the machine, the air vent will rise to position 75º first, then return to position 45º automatically. For resetting the angle, the air vent will rise to 75º first, too. All the above functions can also be performed with the supplied remote control. To prolong the compressor's life, after switch-off of the unit, please wait for 3 minutes (at least) before re-switch. The cooling system will switch off if the ambient temperature is lower than the set one. If the ambient temperature rises above the selected level, the cooling will return to work. Dehumidification function In dehumidification mode, the temperature cannot be adjusted, the ventilation will fix at low speed. [. . . ] If you wish to operate the unit without the need to empty the water tank, please: Connect the drain tube supplied to the water outlet as shown and locate the other end into a drain. If you want to extend the water tube, you can connect it with another tube (OD: 18mm) MAINTENANCE Always unplug the air conditioner from the mains before cleaning. Never use aggressive chemicals, gasoline, detergents, chemically treated cloths, or other cleansing solutions. Cleaning the filter Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt from the filters and then rinse thoroughly under running water (no hotter than 40oC). [. . . ]