User manual PUR LINE FANY 05

[. . . ] You have just acquired a quality device that will give you full satisfaction. This instruction manual contains important instructions on the operation and maintenance of this device. Please read and keep this manual for your later reference: You must read and follow the following instructions before installing, using, cleaning, or repairing your device so as to avoid any danger and in order to not risk causing damage to your belongings. [. . . ] Do not use the device without the protection grille or if it is damaged. You must never insert fingers or any other object into the air intake or output vents; this could cause a fire, electrocution, or damage the fan. You must never touch the fan; all objects must be moved away from the fan (furniture, etc. The device must be installed on a stable, flat, hard surface; it must not be able to be knocked over. Avoid placing any object on the electrical cord or locating the cord in an area of traffic, could cause tripping. The device must absolutely not be installed in a laundry room, a bathroom near a sink, a pool. ASSEMBLY Pass the electrical cord through the base, and then assemble the two halves that form it. Insert the base into the bottom of the tower taking care to align the corresponding openings with each other. Carefully turn over the tower; assemble the base and the tower with the help of the two supplied screws. Carefully install the electrical cord in "the cord passage guide" pointing toward the back of the device. When the batteries are worn out, remove them from the remote control and dispose of them in a proper place. OPERATION The fan can be controlled from the remote control or the control panel on the device. ON/OFF SWITCH On/Off Button, press once on this button in order to turn on the device. fan speed: Use the SPEED buttons to increase and reduce the speed of the device. "OSCILLATION" button Press on the OSC button in order to make the device oscillate, in order to stop the oscillation press again on this button The two arrows are displayed on the LED screen when oscillation is requested. Press on this button one time and the device will function for one hour; press two times and it will function two hours and so on up to 12 times in order to obtain 12 hours of functioning. [. . . ] Worn out appliances must be collected separately so as to optimise the recovery and recycling rate of the materials that compose them and reduce the impact on human health and the environment. the "crossed out trash bin" symbol is affixed on all the products as a reminder of the obligations of separate collection. The consumers must contact the local authorities or their reseller concerning the procedure to follow for the removal of their appliance. [. . . ]