User manual PUR LINE CHD 120C

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PUR LINE CHD 120C. We hope that this PUR LINE CHD 120C user guide will be useful to you.


PUR LINE CHD 120C : Download the complete user guide (455 Ko)

You may also download the following manuals related to this product:

   PUR LINE CHD 120C FICHE TECHNIQUE (77 ko)

Manual abstract: user guide PUR LINE CHD 120C

Detailed instructions for use are in the User's Guide.

[. . . ] It must be changed by a qualified electrician or the manufacturer to avoid any danger 7. Always close the power switch and unplug power cord before servicing or moving the heater. Any other use is not recommended by the manufacturer and could cause fire, electrical shock, or injury to persons. [. . . ] Locate the power cord so the heater or other objects are not resting on it. Arrange power cord away from room traffic and where it will not be tripped over. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 0. It must not be used in potentially dangerous locations such as flammable, explosive, chemical-laden or wet atmosphere. Never locate a heater where it may fall into a bathtub or other water container. Make sure that the heater is in the OFF (0) position before plugging the heater into a outlet. The power light will light up when initially plugging the heater into a outlet. Low heat (1000-1200W) is represented by the I and High heat (1800W) by the II. For fan-only operation, without any heat output, turn Power knob to the fan setting represented by The Power light will remain lit during operation. Before setting the thermostat, allow heater to operate and warm up the room. When the desired temperature comfort level is reached, lower the thermostat setting until the heater stops operating. This is done by moving the thermostat knob towards the minimum setting (-). The heater will now automatically maintain the pre-set temperature level by cycling the heater ON and OFF (0). To prevent the unit from cycling, you need to adjust the thermostat setting. After the heater has cool down, plug the heater into the outlet and operate normally. OSCILLATION Start/Stop of oscillation 0-----STOP OSCILLATION I----- START OSCILLATION TIP OVER SWITCH : Your heater is designed to automatically shut off when tipped forward or backward. [. . . ] To benefit from the warranty, please return the device to your dealer with POSTAGE PAID along with the document of purchase proof specifying the date of purchase. Removal of used domestic appliances European directive 2002/96/EC on the Electric and Electronic Equipment Waste requires that domestic appliances not be thrown out together with the rest of municipal waste. Used devices must be collected separately in order to optimize recuperation and recycling rates of the materials that make them up and so reduce the impact on human health and the environment. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PUR LINE CHD 120C




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PUR LINE CHD 120C will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.