User manual PRIZEE.COM 627BC01172

[. . . ] Telephone No. : 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For the Customers in the U. S. A. Declaration of Conformity Trade Name: PRIZEE. COM Model No. : DSC-P93 Responsible Party:Sony Electronics Inc. Telephone No. : 858-942-2230 This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. [. . . ] · You can carry out this operation even when the mode dial is set to P, M, , , , , , , or . 18 Getting started Clock Set Y/M/D M/D/Y D/M/Y 2004 / 1 / 1 12 : 00 AM Clock Set Y/M/D M/D/Y D/M/Y 2004 / 1 / 1 12 : 00 AM Clock Set Y/M/D M/D/Y D/M/Y 2005 / 1 / 1 10 : 00 AM OK Cancel OK Cancel OK Cancel 3 , Select the desired date format with v/V on the control button, then press z. You can select from [Y/M/D] (year/month/ day), [M/D/Y], and [D/M/Y]. · If the rechargeable button battery, which provides the power for saving the time data, is ever fully discharged (page 119), the Clock Set screen will appear again. When this happens, reset the date and time by starting from Step 3 above. 4 , Select the year, month, day, hour, or minute item you want to set with b/B on the control button. v is shown above and V is shown below the selected item. 5 , Set the desired numerical value with v/V on the control button, then press z. After setting the current numerical value, set the next item. Repeat Steps 4 and 5 until all of the items have been set. · If you select [D/M/Y] in Step 3, set the time on a 24-hour cycle. · 12:00 AM stands for midnight and 12:00 PM stands for noon. 19 Clock Set Y/M/D M/D/Y D/M/Y 2005 / 1 / 1 10 : 30 AM OK Cancel 6 , Select [OK] with B on the control button, then press z. The date and time are set and the clock will start to keep time. · To cancel the setting process, select [Cancel], then press z. 20 Shooting still images Inserting and removing a "Memory Stick" Terminal side Label side Access lamp Shooting still images 1 , Open the battery/"Memory Stick" cover. Turn up the battery/"Memory Stick" cover, and slide the cover in the direction of the arrow. · Be careful not to drop the batteries when opening or closing the battery/"Memory Stick" cover. · For details on "Memory Stick, " see page 119. 2 , Insert the "Memory Stick. " Insert the "Memory Stick" all the way in until it clicks as shown in the illustration. · Whenever you insert a "Memory Stick, " push it as far as it can go. If you do not insert it correctly, a proper recording or playback may not be carried out. 3 , Close the battery/"Memory Stick" cover. To remove the "Memory Stick" Open the battery/"Memory Stick" cover, then push the "Memory Stick" to pop it out. · Whenever the access lamp is lit, the camera is recording or reading out an image. Never open the battery/"Memory Stick" cover or turn off the power at this time. The data may be corrupted. 21 Setting the still image size Mode dial DSC-P93 627BC01172 5M DSC-P93 4M 627BC01172 4M 3:2 3M 1M VGA 5M 3:2 3M 1M VGA(E-Mail) Image Size 4M 3:2 3M 1M VGA(E-Mail) Image Size 5M 3:2 3M 1M VGA(E-Mail) Image Size VGA(E-Mail) Image Size VGA 1 , Set the mode dial to turn on the power. and 2 , Press (Image Size). The Image Size setup item appears. · For more information about the image size, see page 23. 3 , Select the desired image size with v/V on the control button. The image size is set. The Image Size setup item disappears from the LCD screen. · This setting is maintained even when the power is turned off. · You can carry out this operation even when the mode dial is set to P, M, , , , , or . 22 Image size and quality You can choose image size (number of pixels) and image quality (compression ratio) based on the kind of images you want to shoot. The image size is shown by the number of pixels (dots) (horizontal × vertical), which compose an image. The Auto Focus function may be difficult to use with in the following subjects. In such cases, release the shutter button, then try to recompose the shot and focus again. · The subject is distant from the camera and dark · The contrast between the subject and its background is poor · The subject is seen through glass, such as a window · A fast-moving subject · The subject has a reflection, such as that from a mirror, or there is a luminous body and a lustrous subject · A flashing subject · A backlit subject. There are two Auto Focus functions: "AF range finder frame" which sets the focus position according to the subject position and size, and "AF mode" which sets when the camera starts and stops focusing on. See page 49 for details. 26 Checking the last image shot ­ Quick Review VGA Using the zoom feature W (wide-angle) T (telephoto) Zoom Your camera is equipped with zoom functions that enlarge the image using optical zoom and two types of digital processing. Digital zoom can be selected from smart zoom or precision digital zoom. When digital zoom is set, the zoom method switches from optical zoom to digital zoom when the zoom scale exceeds 3×. To use only the optical zoom, set [Digital Zoom] to [Off] in the SET UP settings (page 116). In this case, the digital zoom area does not appear in the zoom scale display bar on the LCD screen, and the maximum zoom is 3×. The enlargement method and the zoom scale differ according to the image size and the zoom type, so select the zoom to match the shooting purpose. When you press the zoom button, the zoom scaling indicator appears on the LCD screen as follows. Shooting still images 101 8/8 x1. 1 VGA 101 VGA 101 98 98 Review S x5. 0 RETURN 101-0008 2005 1 1 10:30PM , Press b (7) on the control button. To return to shooting mode, press the shutter button lightly or press b (7) on the control button again. [. . . ] · For details on the menu items, see page 112. · The displayed items differ depending on the position of the mode dial. c Select the setting item you want to change with b/B on the control button. · For details on the mode dial, see page 10. 3. 0m 1. 0m 0. 5m Center AF Multi AF Focus 0. 5m WB ISO · When the mode dial is set to , press z on the control button after you select a setting. d Select the desired setting with v/V on the control button. The frame of the selected setting is scaled up, and the setting is entered. 46 Changing items in the SET UP screen a Set the mode dial to SET UP. The SET UP screen appears. Camera Single AF Mode: Smart Digital Zoom: Off Date/Time: Red Eye Reduction: Off AF Illuminator: Auto Auto Review: Off SELECT Deciding the still image quality You can select the still image quality from [Fine] or [Standard]. MENU Control button c Select (P. Quality) with b/B, then select the desired image quality with v/V. Mode dial b Select the setting item you want to change with v/V/b/B on the control button. The frame of the item you select turns yellow. Setup 2 File Number: USB Connect: OK Video Out: Cancel Clock Set: Before advanced operations a Set the mode dial to P, M, , , , or . b Press MENU. The menu appears. , c Press z on the control button to enter the setting. To turn off the SET UP screen display Set the mode dial to any position other than SET UP. · For details on the SET UP items, see page 116. 47 Creating or selecting a folder Your camera can create multiple folders within a "Memory Stick. " You can select the folder used to store images. When not creating a new folder, "101MSDCF" folder is selected as the recording folder. [. . . ]