User manual PRESONUS FIRESTUDIO 26X26 SCHEMA FOR 3MSR MODES

[. . . ] [. . . ] By adding a DigiMax FS to your system, you can use its DAC outputs to send four different monitor mixes while tracking. The FireStudio's analog outputs will be used for stereo, 2. 1, and 5. 1 monitoring. This example shows two different stereo pairs of studio monitors for reference switching and a separate 5. 1 system for surround mixing. By simply powering down the Center monitor of the surround system, the system's Subwoofer can be used for 2. 1 mixing as well while in Mix mode. Subwoofer (MSR Surround Mode: SUB/LFE) OR (MSR Mix Mode: Speaker C) Surround Sound Front Left Surround Sound Front Right (MSR Surround Mode: R) (MSR Surround Mode: L) Main Monitors (MSR Mix Mode: Speaker A) Secondary Mains (MSR Mix Mode: Speaker B) Surround Sound Center (MSR Surround Mode: C) Surround Sound Rear Left (MSR Surround Mode: Ls) Surround Sound Rear Right (MSR Surround Mode: Rs) Power down Center speaker for 2. 1 mixing MSR `MIX' MODE: Stereo Mix Monitor Pairs MSR `SURROUND' MODE: Surround Sound Monitor System 4 Monitor Mixes routed to ADAT out 1-8 in the FireStudio Control Console FireStudio (back) MSR DigiMax FS (back) Headphone Mix 4 Headphone Mix 3 Headphone Mix 2 Headphone Mix 1 MSR `TRACK' MODE: Headphone Mixes PreSonus Audio Electronics | 7257 Florida Blvd, Baton Rouge, LA USA | Tel: 225-216-7887 | Fax: 225-926-8347 | www. presonus. com | sales@presonus. com [. . . ] [. . . ]