User manual PRESONUS FIREPODCONFIG

[. . . ] In this example, we have three different mixes being sent to the HP60 from the FireStudio as well as four other sources being sent to the external inputs of the HP60; allowing the musicians to customize their personal monitor mix. [. . . ] The DigiMax FS's DAC outputs are being utilized for additional analog outputs. You'll notice there is an external hardware reverb unit connected to the channel 1 send on the FireStudio. Because the external inputs of the HP60 are stereo, you'll also notice the drummer and bassist's click, the vocalist's reverb, and the rhythm guitarist's direct patch of their signal all necessitate that the mono button be enabled on their channels. Our Acoustic Guitarist is muting the two Mix options on the HP60, opting instead to have a custom Hardware Reverb Unit monitor mix sent from the FireStudio Control Console. FireStudio (back) FireStudio Input 1 DigiMax FS (back) HP60 (back FireStudio Control Console Outputs / Router Matrix: Analog Out 1&2: Mix A, Analog Out 3&4: Mix B, Analog Out 5 & ADAT Out 1: Click Track [Patch], Analog Out 6: Rhythm Guitar Input [Patch], Analog Out 7&8: Keyboards L/R [Patch], ADAT Output 5&6: Guitar Mix Drum Monitor mix (Mix B plus Click) Rhythm Guitar (Mix B plus self) Keyboards (Mix A plus self) Bass Mix B plus Click) Acoustic Guitar (Separate Mix) Vocals (Mix A plus Reverb) PreSonus Audio Electronics | 7257 Florida Blvd, Baton Rouge, LA USA | Tel: 225-216-7887 | Fax: 225-926-8347 | www. presonus. com | sales@presonus. com [. . . ] Because the external inputs of the HP60 are stereo, you'll also notice the drummer and bassist's click, the vocalist's reverb, and the rhythm guitarist's direct patch of their signal all necessitate that the mono button be enabled on their channels. [. . . ]