User manual PRESONUS FADERPORT

[. . . ] In no event will PreSonus be liable for incidental, consequential or other damages resulting from the breach of any express or implied warranty, including, among other things, damage to property, damage based on inconvenience or on loss of use of the product, and, to the extent permitted by law, damages for personal injury. Some states do not allow the exclusion of limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty only applies to products sold and used in the United States of America. [. . . ] Channel Select Quickly bank through your tracks and access your main output bus fader with these controls. Bank one track at a time with the left and right arrow buttons, or hold the bank button to bank 8 tracks at a time (BANK + < or >). Also, the FaderPort will follow the channel selection within the DAW via keyboard or mouse. Fader Mode Set the selected track's fader in read, write, and/or touch mode, or turn the fader motor off with these controls. In TOUCH mode, the fader will follow any automation present until it is touched. When touched, it will begin to write new automation until you let go of it. To leave your track in read mode in your DAW and eliminate any fader noise, simply set the Fader Mode to OFF. 6 1 OVERVIEW 8. Window View Open and close your DAW's main windows, and quickly access the `Undo' and `Redo' (SHIFT+UNDO) functions with these controls. MIX opens the mixer window, PROJ opens the main project window, and TRNS opens the transport (stop, play, etc) window. SHIFT The SHIFT key and its functions below or above each button in the Transport and Window View sections. If you press and release the SHIFT button, it will latch on, so you can drop and navigate markers without having to continually hold the SHIFT button down (The button will not latch if you press and hold it). PUNCH In Native mode for Nuendo/Cubase, this button is assigned to turn PUNCH IN ON and OFF according to the set PUNCH IN/OUT region. To manually punch in/out, simply press the RECORD button while the DAW is playing. In HUI mode for Pro Tools and Logic, this button operates as a latching button that allows you to manually "punch record" while playing the project. In Native mode for Nuendo/Cubase this is assigned to turn post roll off and on. Selected section of project will replay automatically or "loop" when in this mode. SHIFT-PREV Moves cursor to previous set marker. 7 1 OVERVIEW 16. RTZ (return to zero) Press REWIND and STOP simultaneously to return to beginning of project. 8 1 OVERVIEW Rear Panel a. The motorized fader will not function without this power supply connected. Reset Internal button can be accessed with a pointed object (pen, paperclip, etc), and may be used in the process of a firmware update (please refer to section 4. 1 for more info). USB Connect the USB cable from this connector to any USB connector on your computer. Footswitch Connect a footswitch here to control punch ins/outs with a footswitch. [. . . ] If you are experiencing trouble with your FaderPort, before contacting tech support try the following: 1. Close all other applications and disconnect any unnecessary peripherals. When contacting technical support, please have the following information at hand: 1. ) What Operating System and version (ex; Mac OSX 10. 4. 7) are you running?2. ) What DAW software are you using, or do you have access to use with the FaderPort? [. . . ]