User manual PRESONUS 1BOX QUICK START GUIDE

[. . . ] To obtain warranty service, the purchaser must first call or write PreSonus at the address and telephone number printed below to obtain a Return Authorization Number and instructions of where to return the unit for service. All authorized returns must be sent to the PreSonus repair facility postage prepaid, insured and properly packaged. PreSonus reserves the right to change or improve the design of the product at any time without prior notice. This warranty does not cover claims for damage due to abuse, neglect, alteration or attempted repair by unauthorized personnel, and is limited to failures arising during normal use that are due to defects in material or workmanship in the product. [. . . ] When sync is achieved the LED is a steady blue. 7 2 INSTALLATION 2. 1 COMPUTER REQUIREMENTS Below are the required computer system specs for your 1BOX: Windows - OS: Microsoft Windows XP Service Pack 1 or later - Computer: Windows compatible computer with 1394 port (PCI or built-in) - CPU/Clock: Pentium, 1. 6MHz or higher - Memory (RAM): 512 MB (1GB recommended) Macintosh - OS: Mac OSX 10. 3. 7 or later - Computer: Apple Macintosh series with 1394 port (PCI or built-in). - CPU/Clock: PowerPC G4/1. 2Mhz or higher, all Intel/Mac models - Memory(RAM): 512 MB (1GB recommended) Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. 8 2 INSTALLATION 2. 2 Installation PC: The following is a detailed procedure for installation of your 1BOX Drivers: *YOU MUST INSTALL DRIVERS BEFORE CONNECTING YOUR 1BOX* 1. ) Quit all currently running applications. 3. ) CD should auto run. * (If not, navigate to CD and double click on 1BOX_Installer. exe) *There are several parts to the installation of your 1BOX. Please read each message carefully as the time at which you connect and power on your 1BOX for the first time is critical to a successful installation. *If at any point during installation a "Software Installation" message appears from Windows regarding Windows Logo testing click "Continue Anyway" to continue installation. 9 2 INSTALLATION 4. ) When prompted to restart your computer, do so. 5. ) Once the computer has restarted, connect your 1BOX to the computer via FireWire . Select `No, not this time', when prompted to connect to the internet for Windows to find a driver. 7. ) The next window that comes up should identify the PreSonus Driver and allow you to choose `Install Software Automatically'. You should now see a blue sync light on your 1BOX, indicating that it is sync with your computer and ready to use. Note: The 1BOX Control Console application can be found in the Start Menu/ All Programs/ PreSonus Drivers/ 1BOX CPL. Mac: *YOU MUST INSTALL DRIVERS BEFORE CONNECTING YOUR 1BOX* 1. ) Quit all currently running applications. Cursor to Track Direct, and use the TIME/VALUE wheel to turn Track Direct ON. Cursor to the R-Bus Outputs, and use the TIME/VALUE wheel to connect the R-Bus output pairs with the Track Numbers down the right side of the screen. This will route individual VS-2480 audio track outputs to the V-Fire inputs via R-Bus. Alternatively, Leave Track Direct OFF and connect the R-Bus output pairs at the top of the screen to Auxes, Directs or Busses of your choice, using the TIME/VALUE wheel. Alternatively, Leave Track Direct OFF and connect the R-Bus output pairs on the top of the screen to Auxes, Directs, or Busses of your choice, using the TIME/VALUE wheel. Roland VS-2400CD, Using a VGA Monitor Digital Clock (Slave) From the Utility menu, select Project Parameter. 17 5 ROLAND VS SETTINGS Set the Master Clock to R-Bus. ["Digital In Lock" will appear in the screen indicating that the Roland device is locked to the V-Fire digital clock. ] Input to VS-2400CD From the EZ ROUTING menu, press F1 for View. In the Patch Bay section of the screen (top left), attach up to 8 input mixer channels to the 8 R-Bus inputs using the mouse. Raise the appropriate input mixer channel faders to monitor the incoming audio signals. In the Output Assign section of the screen (Top Right), turn Track Direct to ON. Use the mouse to connect the R-Bus output pairs on the top of the screen with the Track Numbers down the right side of the screen. [. . . ] ["Digital In Lock" will appear in the screen indicating that the Roland device is locked to the V-Fire digital clock. ] The MV-8000 will use R-Bus channels 1&2 for its input. 22 5 ROLAND VS SETTINGS Input to MV-8000 Click on the Sampler menu, and select Sampling. Click OUTPUT at the bottom of each mixer channel, and select Mlt 1-8 for individual R-Bus channels 1-8, or M1/2 ­ M7/8 for stereo pairs of R-Bus channels. 5. 7 Roland VM-7000 Series Digital Clock (Slave) Press SHIFT+SYSTEM(PROJECT). Cursor down and press F1 - DIGITAL I/O Change Word Clock Source to Multi 1-8 Make sure the Internal Sampling Rate matches your computer settings. [. . . ]