User manual PRESIDENT PM-2010 WP

[. . . ] The Lithium Ion Battery Pack contained in this equipment may explode if disposed of in a fire. Do not charge the Lithium Ion Battery Pack used in this equipment in any charger other than the one designed to charge this Battery Pack. Using another charger may damage the Battery Pack or cause the Battery Pack to explode. [. . . ] To turn Off the unit, turn the Volume / Power knob counterclockwise until it clicks. Seagoing / Inland Mode Seagoing Mode Transmit power is limited to low at channels 75 and 76 in Seagoing mode. Inland Mode Transmit power is limited to low at channels 6, 8, 10 to 15, 17, 71, 72, 74, 75, 76, and 77 in Inland mode. Set Seagoing / Inland Mode Turn on the radio while pushing and holding 1/5W and 16/9 keys, "Inland Mode" or "Seagoing Mode" are switched. One-touch Emergency Channel 16/9 Example: While you are monitoring channel 20, you want to check EMG channel 16 or EMG channel 9. While in Triple Watch mode, you can change the currently selected channel using the or button. A momentary press of the 16/9 button interrupts Triple Watch mode and remains on 16, or on channel 9 if you press once more. It becomes Dual Watch when Triple Watch function is turned on while CH9 or CH16 is displayed. Programming a Channel into Memory Before using the scanning feature, you have to program channels into memory. Scanning starts from the lowest to highest channel and stops when it finds an active channel. It remains on that channel until the transmission ends, then resumes scanning after a 3 second delay period. When in the scan mode, the unit automatically activates the Triple Watch feature. Press the 1/5W button to make the change, then the "5W" or the "1W" indicator on the display changes accordingly. If the PTT key is pressed for more than 5 minutes, "TX" starts blinking and the transmission ends. [. . . ] It is recommended to read carefully following conditions and to respect them in order not to loose it. Any repair under warranty will be free of charge and the transport costs for sending back will be on charge of our company. A proof of purchase must compulsorily be added to the transceiver in need of repair. [. . . ]