User manual PRESIDENT PM-1000 WP

[. . . ] Do not operate the transmitter of any radio equipment near electrical blasting caps or in an explosive atmosphere. Do not let children operate any transmitter-equipped radio equipment without proper supervision. Do not charge the Ni-MH Battery Pack used in this equipment with any Adapter other than the one designed to charge this Battery Pack. [. . . ] Then, turn On the unit by turning the Volume/Power VOL knob clockwise until you hear a hissing sound. Think of the squelch control as a frequency gate which controls access to weak or strong signals depending on its setting. To listen to a weak or distant station, turn the knob counterclockwise. If reception is poor, turn it clockwise to cut out weak transmissions. If the squelch control is adjusted so that you continually hear a hissing sound, the unit will not scan properly. To turn Off the unit, turn the VOL knob counterclockwise until it clicks. One-touch Channel 16/9 Example: While you are monitoring channel 20, you want to check channel 16 or channel 9. While in Triple Watch mode, you can change the currently selected channel using the or button. Programming a Channel into Memory Before using the scanning feature, you have to program channels into memory. Scanning starts from the lowest to highest channel and stops when it finds an active channel. It remains on that channel until the transmission ends, then resumes scanning after a 2 second delay period. When in the scan mode, the unit automatically activates the Triple Watch feature. Press the 1/5W button to make the change, then the 5W or the 1W indicator on the display changes accordingly. If the PTT key is pressed for more than 5 minutes, TX starts blinking and the transmission ends. [. . . ] Our technical department won't send nor exchange any spare parts as part of warranty. Are not covered · Damages caused by accident , shock , inadequate packing or the use of accessories that are not in conformity. Interventions that modified the conformity features, repairs or modifications done by third parties which are not agreed by our company. [. . . ]