User manual POULAN PRO PP1000E

[. . . ] R ENGLISH ESPAÑOL Instruction Manual Manual de Instrucciones Manuel d'Instructions PP1000E WARNING: Read and follow all Safety Rules and Operating Instructions before using this product. ADVERTENCIA: Lea el manual de instrucciones y siga todas las advertencias e instrucciones de seguridad. AVERTISSEMENT: Lire le manuel d'instructions et bien respecter tous les avertissements et toutes les instructions de sécurité. Tout défaut de le faire pourrait entraîner des blessures graves. Electrolux Home Products, Inc. [. . . ] S Have all maintenance and service not explained in this manual performed by an authorized service dealer. S If blade strikes a foreign object, follow these steps: stop unit and disconnect spark plug wire (or disconnect from power source), inspect for damage, and repair any damage before resuming operation of the unit. 3 EDGING SAFETY WARNING: Inspect the area to be edged before each use. Remove objects (rocks, broken glass, nails, wire, string, etc. ) which can be thrown by the blade or can wrap around the shaft. S Keep others including children, animals, bystanders, and helpers at least 50 feet (15 meters) away. S Keep all parts of your body away from the blade and muffler. Thrown Objects Safety Glasses Boots S Always push the unit slowly over the ground. Stay alert for uneven sidewalks, holes in the terrain, large roots, etc. S To reduce the risk of fire, do not allow excessive grass, leaves, or grease to accumulate on the attachment. S Objects struck by the cutting member can cause serious injuries to persons. The lawn should always be carefully examined and cleared of all objects prior to edging. S Never operate without blade shield in place. WARNING: Blades can throw objects violently. D Wear safety glasses and boots. WARNING: Hazard zone for thrown objects. Allow blades to stop before removing them from the cut. WARNING: Blades move momentarily after the trigger is released. D Allow blades to stop before removing them from the cut. WARNING: Instruction Manual Safety Decals Read Instruction Manual. D Failure to do so can result in serious injury. TRANSPORTING AND STORAGE S Do not grasp or hold exposed blade. S Allow powerhead and gearbox to cool before storing or transporting it in a vehicle. S Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc. If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, call 1-800-554-6723. SPECIAL NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration system does not guarantee the avoidance of these problems. Ensure handlebar is positioned on mounting bracket at the end of the arrow on the handlebar decal. [. . . ] Throw away a blade that is not flat. CHECK FOR LOOSE FASTENERS AND PARTS S Blade nut S Fasteners INSPECT AND CLEAN UNIT AND DECALS S After each use, inspect complete unit for loose or damaged parts. S Wipe off unit with a clean dry cloth. SERVICE AND ADJUSTMENTS BLADE REPLACEMENT WARNING: The blade will continue to spin after the engine stops or after the throttle trigger has been released. To avoid serious injury, make sure the blade has stopped coasting and disconnect the spark plug (or disconnect powerhead from power source) before performing work on the blade. WARNING: Wear protective gloves when handling or performing maintenance on the blade to avoid injury. [. . . ]