User manual PORT DESIGNS MANHATTAN BACKPACK TROLLEY BROCHURE

[. . . ] The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaim any implied warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any person of such revision or changes. Limitations of Liability UNDER NO CIRCUMSTANCES SHALL PORT DESIGNS OR ITS SUPPLIERS BE LIABLE FOR DAMAGES OF ANY CHARACTER (E. G. DAMAGES FOR LOSS OF PROFIT, SOFTWARE RESTORATION, WORK STOPPAGE, LOSS OF SAVED DATA OR ANY OTHER COMMERCIAL DAMAGES OR LOSSES) RESULTING FROM THE APPLICATION OR IMPROPER USE OF THE PORT DESIGNS PRODUCT OR FAILURE OF THE PRODUCT, EVEN IF PORT DESIGNS IS INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. FURTHERMORE, PORT DESIGNS WILL NOT BE LIABLE FOR THIRD-PARTY CLAIMS AGAINST CUSTOMER FOR LOSSES OR DAMAGES. [. . . ] 509 certificate is used to authenticate a VPN client or gateway when establishing an IPsec tunnel. Properties Name Type CertificateData PrivateKey NoCRLs Comments Specifies a symbolic name for the certificate. Client This is a category that groups the following object types. 3. 8. 1. DynDnsClientCjbNet Description Configure the parameters used to connect to the Cjb. net DynDNS service. Properties Username Password Comments Username. (Optional) Note This object type does not have am identifier and is identified by the name of the type only. DynDnsClientDLink Description Configure the parameters used to connect to the D-Link DynDNS service. Properties DNSName Username Password Comments The DNS name excluding the . dlinkddns. com suffix. (Optional) Note This object type does not have am identifier and is identified by the name of the type only. DynDnsClientDyndnsOrg Description Configure the parameters used to connect to the dyndns. org DynDNS service. 67 3. 8. 4. Configuration Reference Properties DNSName Username Password Comments The DNS name excluding the . dyndns. org suffix. (Optional) Note This object type does not have am identifier and is identified by the name of the type only. DynDnsClientDynsCx Description Configure the parameters used to connect to the dyns. cx DynDNS service. Properties DNSName Username Password Comments The DNS name excluding the . dyns. cx suffix. (Optional) Note This object type does not have am identifier and is identified by the name of the type only. (Default: Recv) Accept server responses offering IP address "0. 0. 0. 0" (no IP address offered). (Default: No) Always select all interfaces, including new ones, for publishing routes needed for the relay via Proxy ARP. (Default: No) Specifies the interface/interfaces on which the security gateway should publish routes needed for the relay via Proxy ARP. (Default: No) Specifies with what severity log events will be sent to the specified log receivers. (Optional) AgentIP AllowNULLOffers ProxyARPAllInterfaces ProxyARPInterfaces LogEnabled LogSeverity Comments 72 3. 12. DHCPServer Description A DHCP Server determines a set of IP addresses and host configuration parameters to hand out to DHCP clients attached to a given interface. Properties Name Interface IPAddressPool Netmask DefaultGateway Specifies a symbolic name for the DHCP Server rule. A range, group or network that the DHCP Server will use as IP address pool to give out DHCP leases from. Specifies what IP should be sent to the client for use as default gateway. If unspecified or if 0. 0. 0. 0 is specified, the IP given to the client will be sent as gateway. (Optional) The time, in seconds, that a DHCP lease should be provided to a host after this the client have to renew the lease. (Optional) IP of the primary Windows Internet Name Service (WINS) server that is used in Microsoft environments which uses the NetBIOS Name Servers (NBNS) to assign IP addresses to NetBIOS names. [. . . ] Specifies the authentication servers that will be used to authenticate users matching this rule. Specifies the authentication method used for encrypting the user password. (Default: PAP) Specifies the local user database that will be used to authenticate users matching this rule. (Default: HTMLForm) The string that is presented as a part of the 401 - Authentication Required message. [. . . ]