User manual POLYCOM VSX7000S

[. . . ] Getting Started Guide for the VSX Series Version 8. 5 May 2006 Edition 3725-21286-008/A GETTING STARTED GUIDE FOR THE VSX SERIES Trademark Information Polycom®, the Polycom logo design, and ViewStation® are registered trademarks of Polycom, Inc. , and ImageShareTM, PathNavigatorTM, People+ContentTM, PowerCamTM, QSXTM, SoundStation VTX 1000TM, StereoSurroundTM, Visual ConcertTM, VS4000TM, and VSXTM are trademarks of Polycom, Inc. All other trademarks are the property of their respective owners. Patent Information The accompanying product is protected by one or more U. S. and foreign patents and/or pending patent applications held by Polycom, Inc. © 2006 Polycom, Inc. 4750 Willow Road Pleasanton, CA 94588-2708 USA No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Polycom, Inc. [. . . ] Press Directory on the remote control. Scroll to the entry you want to edit and then select Edit. Select Save to save your changes and return to the directory. To delete an entry: 1. Press Directory on the remote control. Scroll to the entry you want to delete and then select Delete. While you can delete entries from your local directory, you cannot delete entries from a global directory. Categorizing Directory Entries When you categorize your local entries, you can find calling information quickly by searching just the entries in a group instead of the entire directory. Press Back on the remote control to save the new group. To delete a group: 1. Scroll to the group name you want to delete and then select Delete. When you delete a group, all entries in that group are deleted. If you want to keep these entries, be sure to assign them to a new group before you delete the old group. 22 WWW. POLYCOM. COM/VIDEODOCUMENTATION WORKING WITH DIRECTORY ENTRIES To assign an entry to a group: 1. Press Directory on the remote control. Scroll to the entry you want to assign to a group and then select Edit. Select Next and select the Category. Select Save to save your changes and return to the directory. Refreshing Global Directory Entries The global directory entries are periodically refreshed on systems registered to the Global Directory Server. You can also manually refresh the global directory entries on your system. Press Directory on the remote control. Navigate to the red Polycom logo in the top right corner of the screen. If you do not see a red Polycom logo in the top right corner of the screen, your system is not registered with the Global Directory Server. Contact your system administrator for more information. 3. Select the logo and choose Refresh. © Polycom, Inc. 23 GETTING STARTED GUIDE FOR THE VSX SERIES Including Multiple Sites in Calls Your system may be configured to participate in multipoint conferences. During a multipoint conference, a multipoint conferencing unit (MCU) enables the video to switch between sites so that you can always see and hear the participant who is speaking. You can also share content in a multipoint call, just as you can in a point-to-point call. The VSX 5000 and VSX 6000 systems can be used to participate as a site in a multipoint call but cannot initiate a multipoint call. About Multipoint Calls With the VSX system you can make multipoint calls using an external MCU or the internal multipoint option. The type of MCU affects the conference as shown in this table: This MCU. . . Up to four video sites (six for the VSX 8000) including your site Supports these calls. . . IP ISDN or V. 35 SIP Both IP and ISDN/V. 35 Both SIP and ISDN/V. 35 Note: IP and SIP cannot be used in the same call. External MCU Number of sites allowed by the MCU IP ISDN or V. 35 SIP Both IP and ISDN/V. 35 Note: IP and SIP cannot be used in the same call. For calls using the internal MCU option, the VSX system can initiate the call or the other sites can call the VSX system to join the conference. Before the call begins, and depending on the MCU and conference type, during the call Lets you add sites. . . Before the call begins, and during the call 24 WWW. POLYCOM. COM/VIDEODOCUMENTATION INCLUDING MULTIPLE SITES IN CALLS Placing a Multipoint Call How you place a multipoint call depends on whether you're using the internal MCU option or an external MCU. If your organization uses Polycom's PathNavigatorTM, you can also use PathNavigator's conference on demand feature to place multipoint calls. For calls using the internal MCU option, you can define a multiple-site directory entry to call all of the sites at one time. [. . . ] Connect your computer to the VSX 3000 system as shown on the setup sheet that came with the VSX 3000 system. Press the Input button on the front of the VSX 3000 system to toggle between displaying content from the computer and showing video from the video conferencing system. © Polycom, Inc. 45 GETTING STARTED GUIDE FOR THE VSX SERIES To answer a call while using the VSX 3000 system as a computer monitor: 1. When you hear a ring, press the Input button on the front of the system to switch to the video conferencing system. You must answer within 90 seconds, or the system will automatically reject the call. [. . . ]