User manual POLYCOM VSX

[. . . ] product pic here Integrator's Reference Manual for the VSX Series Version 8. 5 May 2006 Edition 3725-21905-004/A VSX Version 8. 5 Trademark Information Polycom®, the Polycom logo design, SoundStation®, SoundStation VTX 1000®, and Vortex® are registered trademarks of Polycom, Inc. , and Conference ComposerTM, Global Management SystemTM, ImageShareTM, MGCTM, People+ContentTM, Polycom InstantDesignerTM, Polycom PathNavigatorTM, PowerCamTM, SirenTM, StereoSurroundTM, Visual ConcertTM, VSXTM, and VTXTM are trademarks of Polycom, Inc. All other trademarks are the property of their respective owners. Patent Information The accompanying product is protected by one or more U. S. and foreign patents and/or pending patent applications held by Polycom, Inc. © 2006 Polycom, Inc. 4750 Willow Road Pleasanton, CA 94588-2708 USA No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Polycom, Inc. [. . . ] Valid characters are: A through Z (lower and uppercase), -, _, @, /, ;, , , . , \, and 0 through 9. The password cannot include spaces. "password" Feedback Examples · meetingpassword <empty> meetingpassword set VSXpasswd · returns meetingpassword VSXpasswd Comments User interface screen location: System > Admin Settings > General Settings > Security: Meeting 4 - 163 Integrator's Reference Manual for the VSX Series midrangespeaker Sets or gets whether to use the system's built-in midrange speaker. (VSX 7000, VSX 7000s, and VSX 6000 only) Syntax midrangespeaker <get|on|off> Parameter get on off Description Returns the current setting. Turns the midrange speaker off. Feedback Examples · · midrangespeaker on midrangespeaker off Comments This option is only available when Polycom StereoSurroundTM is disabled. User interface screen location: System > Admin Settings > Audio (page 3): Midrange Speaker 4 - 164 System Commands monitor1 (deprecated) Sets or gets the aspect ratio for Monitor 1. With the implementation of the configdisplay command on page 4-51, this command has been deprecated. Syntax monitor1 <get|4:3|16:9|vga> Parameter get 4:3|16:9 vga Description Returns the current setting. Sets the display aspect ratio to 4:3 (standard) or 16:9 (wide screen). Sets the display to VGA and causes the system to restart. Feedback Examples monitor1 4:3 monitor1 16:9 Comments User interface screen location: System > Admin Settings > Monitors > Monitors: Monitor Command History Deprecated in version 8. 5. See Also See the configdisplay command on page 4-51. 4 - 165 Integrator's Reference Manual for the VSX Series monitor1screensaverouput Sets or gets whether to send either black video or "No Signal" to Monitor 1 when the screen saver activates. Syntax monitor1screensaveroutput <get|black|no_signal> Parameter get black no_signal Description Returns the current setting. Sends black video to Monitor 1 when the system goes to sleep and the screen saver activates. Sends no signal to Monitor 1 when the system goes to sleep and the screen saver activates. Feedback Examples The command monitor1screensaverouput black returns monitor1screensaverouput black The command monitor1screensaverouput get returns monitor1screensaverouput black Comments User interface screen location: System > Admin Settings > Monitors > Monitors Command History Introduced in version 8. 5. See Also See the monitor2screensaverouput command on page 4-168. 4 - 166 System Commands monitor2 (deprecated) Sets or gets the aspect ratio for Monitor 2. With the implementation of the configdisplay command on page 4-51, this command has been deprecated. Syntax monitor2 off monitor2 <get|4:3|16:9> monitor2 vga Parameter off get 4:3|16:9 vga Description Disables the second monitor output. Sets the display to VGA. Feedback Examples · · monitor2 off monitor2 4:3 vga Comments User interface screen location: System > Admin Settings > Monitors > Monitors: Monitor 2 Command History Deprecated in version 8. 5. See Also See the configdisplay command on page 4-51. 4 - 167 Integrator's Reference Manual for the VSX Series monitor2screensaverouput Sets or gets whether to send either black video or "No Signal" to Monitor 2 when the screen saver activates. Syntax monitor2screensaveroutput <get|black|no_signal> Parameter black no_signal get Description Sends black video to Monitor 2 when the system goes to sleep and the screen saver activates. Sends no signal to Monitor 2 when the system goes to sleep and the screen saver activates. Returns the current setting. Feedback Examples The command monitor2screensaverouput black returns monitor2screensaverouput black The command monitor2screensaverouput get returns monitor2screensaverouput black Comments User interface screen location: System > Admin Settings > Monitors > Monitors Command History Introduced in version 8. 5. See Also See the monitor1screensaverouput command on page 4-166. 4 - 168 System Commands mpautoanswer Sets or gets the Auto Answer Multipoint mode, which determines how the system will handle an incoming call in a multipoint video conference. [. . . ] If local presentation is blended with VC for any events, we must consider the needs of the presenter who will not be "facing" the local image or inbound image displays used by the main body of the local audience. One or two monitors (and a camera) should be mounted at the back of the "audience-end" of the room, with the horizontal centerline at approximately 5' from the floor for ease of presentation interaction between the presenter and the group(s) at the farend(s). Remember that, with the exception of PC-based information that is not in a standard composite narrowband video format, any information we A - 12 Room Design and Layout wish to "show" or "view" must be translated to video, most often with some sort of camera mechanism. Document cameras, 35mm slide-to-video units, video scanners and scan conversion devices all are designed to take one format of source material and convert it to a standard video signal that can be digitized, shipped to the far-end(s), and converted back to composite video for display. [. . . ]