User manual POLYCOM SPECTRALINK 6000 INSTALLING THE OUTDOOR BASE STATION VERSION F

[. . . ] The drawings and specifications contained herein are the property of Polycom and shall be neither reproduced in whole or in part without the prior written approval of Polycom, nor be implied to grant any license to make, use, or sell equipment manufactured in accordance herewith. Polycom reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Polycom to determine whether any such changes have been made. No representation or other affirmation of fact contained in this document including but not limited to statements regarding capacity, response-time performance, suitability for use, or performance of products described herein shall be deemed to be a warranty by Polycom for any purpose, or give rise to any liability of Polycom whatsoever. Patent Information The accompanying product is protected by one or more US and foreign patents and/or pending patent applications held by Polycom, Inc. Copyright Notice Copyright © 1998 to 2008 Polycom, Inc. [. . . ] Please refer questions to the Customer Support Hotline at (800) 775-5330. Mountain time. 1725-36127-001-F. doc 3 Installing the Outdoor Base Station For Technical Support: technicalsupport@polycom. com For Knowledge Base: http://www. polycom. com/usa/en/support/voice/voice. html For Return Material Authorization: rmacoordinator@polycom. com 4 1725-36127-001-F. doc Contents 0 About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Polycom Corporation Model Numbers Related Documents Contacting Polycom 3 3 3 1 2 3 Installing Flush Against a Wall or Hard Ceiling . . . . 6 Installing on an I-Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Installing on a Light Pole or Electrical Pole . . . . . . . . . 10 1725-36127-001-F. doc 5 1 Installing Flush Against a Wall or Hard Ceiling Items provided: Items needed: Outdoor enclosure, Base Station 4 anchor bolts (length and type depends on wall or ceiling material Base Station is being mounted to) 1. Mark and drill four holes into the wall or ceiling, using the mounting flanges of the outdoor enclosure as a guide. The outdoor enclosure can be mounted with the compression fitting in any direction. Compression fitting 3. Slide the Base Station cable through the compression fitting and tighten fitting. 6 1725-36127-001-F. doc Installing Flush Against a Wall or Hard Ceiling 4. Crimp an RJ45 onto the Base Station cable using the same wiring guide as the indoor Base Station. Plug the RJ45 into the RJ48C connector. Mounting hole RJ48C connector 6. Place the Base Station into the enclosure with the side of the Base Station with the mounting hole facing the wall or ceiling. Screw the outdoor enclosure lid back onto the enclosure. 1725-36127-001-F. doc 7 2 Installing on an I-Beam Items provided : Items needed : Outdoor enclosure, Base Station 4 ­ "Caddy" or "B-Line" 3/8" Beam Clamps 4 ­ 1/2" long 1/4" x 20 bolts 4 ­ 2" long 1/4" x 20 bolts 4 ­ 1/4" x 20 nuts 1. Attach a beam clamp to the center of the top and bottom flanges on the outdoor enclosure. Attach a second beam clamp to each of the beam clamps on the enclosure using a 1/2" long 1/4" x 20 bolt and a nut. Attach the outdoor enclosure to I-beam using the beam clamps attached in step 2. See figures in Chapter 1 for pictorial data for the remaining steps: 4. Slide the Base Station cable through the compression fitting and tighten the fitting. Crimp on RJ45 onto the Base Station cable using the same wiring guide as the indoor Base Station. [. . . ] Slide the Base Station cable through the compression fitting and tighten the fitting. Crimp an RJ45 onto the Base Station cable using the same wiring guide as the indoor Base Station. Plug the RJ45 into the RJ48C connector. 10 1725-36127-001-F. doc Installing on a Light Pole or an Electrical Pole 7. [. . . ]