User manual POLYCOM SOUNDSTATION 2W

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual POLYCOM SOUNDSTATION 2W. We hope that this POLYCOM SOUNDSTATION 2W user guide will be useful to you.


POLYCOM SOUNDSTATION 2W : Download the complete user guide (2290 Ko)

You may also download the following manuals related to this product:

   POLYCOM SOUNDSTATION 2W Data Sheet (1656 ko)
   POLYCOM SOUNDSTATION 2W Quick Start (3391 ko)
   POLYCOM SOUNDSTATION 2W Product Brochure (566 ko)
   POLYCOM SOUNDSTATION 2W Supplementary Guide (48 ko)
   POLYCOM SOUNDSTATION 2W Product Support Bulletin (375 ko)
   POLYCOM SOUNDSTATION 2W Frequently Asked Questions (107 ko)

Manual abstract: user guide POLYCOM SOUNDSTATION 2W

Detailed instructions for use are in the User's Guide.

[. . . ] SoundStation2WTM USER GUIDE / ADMINISTRATOR GUIDE User Guide and Administrator Guide IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, the following safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to people. · Follow all warnings and instructions marked on the equipment. · Installation must be performed in accordance with all national wiring rules. · The outlet to which this equipment is connected must be installed near the equipment, and must always be readily accessible. [. . . ] For example, if you travel with the phone to a remote location without the base station, the console will switch into Standby to conserve power. The console will automatically reregister to its base station from Standby mode, if it is within range and the base station is powered. In some cases, the phone will not go into Standby mode when a mobile phone is plugged in, even if the mobile phone is not in an active call. In these cases the LCD message will continue to say "Mobile Phone In". Either turn off the mobile phone, or unplug it from the console to enable Standby. The phone will not go into Standby while charging. SoundStation2WTM User Guide - 22 Charging SoundStation2WTM operates on a rechargeable lithium ion battery. Use the supplied charger to recharge the battery while it is installed in the console. In similar fashion to a laptop PC or a mobile phone, the SoundStation2WTM can be used or continue operation while being charged. Typical talk time and standby time are shown here: 2 cell battery Charge Time Talk Time Standby Time 4 hours 12 hours 80 hours 4 cell battery 8 hours 24 hours 160 hours Battery icon displayed on LCD. Charging State The SoundStation2WTM's display will indicate when the battery is charging by animating the battery icon. Low Power The SoundStation2WTM's display will indicate when battery charge is low. The low battery warning will begin when the remaining talk time is approximately 20% or less of the full charge capacity. The warning will be triggered when a user goes back on-hook after completing a call. In addition to a visual message on the console LCD which will read, "Low Battery, Please Charge, " you will hear an audible beeping alert. Optimum battery performance may be achieved only after the battery is conditioned. The battery will have to go through four to five charge and discharge cycles before reaching optimum performance. Talk time is measured for natural conversation at optimum volume levels. SoundStation2WTM User Guide - 23 Auxiliary Audio Output SoundStation2WTM allows the speaker output to be routed to an external recording device. The external recording device should be connected to the base station. Connect an external recording device, such as a cassette tape recorder, via the auxiliary jack on the base station. Press the Menu button on the phone console, choose Settings and press the Select buttons. Press ON or OFF or cycle through the options using the Scrolling button. Press the SAVE soft key or Select button to save the setting Aux Audio Out will return to the Off setting when the call is terminated. The Aux Audio Out does not support external loudspeaker systems. Paging the Console You can locate a misplaced console by using the paging feature. Press the Page button on the base station to locate the SoundStation2WTM console. The console will continue to beep until any key on the console is pressed or until the Page button on the base is pressed. Power On Page In Use SoundStation2WTM User Guide - 24 LCD Message Summary The following messages are displayed on the console LCD to represent various usage conditions. LCD Message Ready No Signal Call Ended Mobile Phone In Searching for Signal Enter Number Charging Base Paging Battery Low What it means: Phone is in idle state and ready to make calls. [. . . ] A full copy of the Declaration of Conformity can be obtained from Polycom Ltd, 270 Bath Road, Slough, Berkshire, SL1 4DX, UK. declares that this SoundStation2W is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Konformitetserklæring: Hermed erklærer Polycom Ltd. , at indestående SoundStation2W er i overensstemmelse med de grundlæggende krav og de relevante punkter i direktiv 1999/5/EF. Konformitätserklärung: Hiermit erklärt Polycom Ltd. , dass der SoundStation2W die grundlegenden Anforderungen und sonstige maßgebliche Bestimmungen der Richtlinie 1999/5/EG erfüllt. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE POLYCOM SOUNDSTATION 2W




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual POLYCOM SOUNDSTATION 2W will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.