User manual POLYCOM SOUNDSTATION 110V

[. . . ] 5 2. 2. 1. 1 DHCP or Manual TCP/IP Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2. 2. 1. 2 Provisioning File Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. 2. 1. 3 Local User Interface Setup Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2. 2. 1. 4 Reset to Factory Defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2. 2. 2 Application Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2. 2. 2. 1 Centralized Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2. 2. 2. 2 Local Phone Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 2. 2. 3 Management of File Encryption and Decryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 2. 2. 3. 1 Changing the Key on the Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 3. 1 Basic Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 3. 1. 1 Call Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The destination for new dialog messages can be entered manually or selected from the contact directory, the preferred method. 3. 5 Localization Features 3. 5. 1 Multilingual User Interface All phones except SoundPoint® IP 300 and 301 have multilingual user interfaces. Support for major western European languages is included and additional languages can be easily added. Support for Asian languages (Chinese, Japanese, and Korean) is also included but will render Copyright © 2006 Polycom, Inc. 61 Administrator's Guide - SoundPoint® IP / SoundStation® IP Features only on the SoundPoint® IP 600's and 601's and SoundStation® IP 4000's higher resolution displays. Basic character support includes the following Unicode character ranges: Name C0 Controls and Basic Latin C1 Controls and Latin-1 Supplement Cyrillic (partial) Range U+0000 - U+007F U+0080 - U+00FF U+0400 - U+045F Extended character support available on SoundPoint® IP 600 and SoundStation® IP 4000 platforms includes the following Unicode character ranges. Note that within a Unicode range, some characters may not be supported due to their infrequent usage. Name CJK Symbols and Punctuation Hiragana Katakana Bopomofo Hangul Compatibility Jamo Bopomofo Extended Enclosed CJK Letters and Months CJK Compatibility CJK Unified Ideographs Hangul Syllables CJK Compatibility Ideographs CJK Half-width forms Range U+3000 - U+303F U+3040 - U+309F U+30A0 - U+30FF U+3100 - U+312F U+3130 - U+318F U+31A0 - U+31BF U+3200 - U+327F U+3300 - U+33FF U+4E00 - U+9FFF U+AC00 - U+D7A3 U+F900 - U+FAFF U+FF00 - U+FFFF Note The multilingual feature relies on dictionary files resident on the boot server. The dictionary files are downloaded from the boot server whenever the language is changed or at boot time when a language other than the internal US English language has been configured. If the dictionary files are inaccessible, the language will revert to the internal language. 62 Copyright © 2006 Polycom, Inc. Administrator's Guide - SoundPoint® IP / SoundStation® IP Features Note Currently, the multilingual feature is only available in the application. At this time, the bootROM application is English only. Central (boot server) Configuration file: sip. cfg Specify the boot-up language and the selection of language choices to be made available to the user. For more information, refer to: · 4. 6. 1. 3. 1 Multilingual <multilingual/> on page 96, and · 4. 6. 1. 3. 1. 1 Adding New Languages on page 97. Web Server (if enabled) Local Local Phone User Interface None. Changes are saved to local flash and backed up to <Ethernet address>-phone. cfg on the boot server. Changes will permanently override global settings unless deleted through the Reset Local Config menu selection. 3. 5. 2 Downloadable Fonts New fonts can be loaded onto the phone. The authentication user ID and password are optional and for security reasons can be omitted from the configuration files. The optional array of servers and their associated parameters will override the servers specified in sip. cfg if non-Null. · For more information, refer to 4. 6. 2. 1 Registration <reg/ > on page 149. 66 Copyright © 2006 Polycom, Inc. Administrator's Guide - SoundPoint® IP / SoundStation® IP Features Web Server (if enabled) Specify the local SIP signaling port and an array of SIP servers to register to. Navigate to: http://<phoneIPAddress>/appConf. htm#se For up to six registrations (depending on the phone model, in this case the maximum is six even for the IP 601), specify a display name, a SIP address, an optional display label, an authentication user ID and password, the number of line keys to use, and an optional array of registration servers. The authentication user ID and password are optional and for security reasons can be omitted from the configuration files. The optional array of servers will override the servers specified in sip. cfg in non-Null. Navigate to: http://<phoneIPAddress>/reg. htm Changes are saved to local flash and backed up to <Ethernet address>-phone. cfg on the boot server. Changes will permanently override global settings unless deleted through the Reset Local Config menu selection. Local Local Phone User Interface Use the SIP Configuration menu to specify the local SIP signaling port, a default SIP server to register to and registration information for up to twelve registrations (depending on the phone model). The SIP Configuration menu contains a sub-set of all the parameters available in the configuration files. Either the Web Server or the boot server configuration files or the local phone user interface should be used to configure registrations, not a mixture of these options. When the SIP Configuration menu is used, it is assumed that all registrations use the same server. [. . . ] The implementation was written so as to conform with Netscape's SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc. , code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft. com). [. . . ]