User manual POLYCOM SOUNDPOINT IP 400

[. . . ] Administrator's Guide SoundPoint®/SoundStation® IP SIP Version 2. 0 August 2006 Copyright © 2006 Polycom, Inc. 1565 Barber Lane, Milpitas CA 95035, USA www. polycom. com Part Number: 1725-11530-200 Rev A1 Copyright © 2006 Polycom, Inc. All rights reserved. Administrator's Guide - SoundPoint® IP / SoundStation® IP Table of Contents Table of Contents 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. 1 Installation Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. 2 Installation Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. 2. 1 Basic Network Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · For more information, refer to 4. 6. 1. 6 Sampled Audio for Sound Effects <sampled_audio/> on page 101. Specify patterns. For more information, refer to: · 4. 6. 1. 7. 1 Patterns <patterns/> on page 103, and · 4. 6. 1. 7. 1. 1 Call Progress Patterns on page 105. None. Local 3. 6 Advanced Server Features 3. 6. 1 Voice Mail Integration The phone is compatible with voice mail servers. The subscribe contact and callback mode can be configured per user/registration on the phone. The phone can be configured with a SIP URL to be called automatically by the phone when the user elects to retrieve messages. Voice mail access can be configured to be through a single key press (for example, the Messages key on the SoundPoint® IP 300, 301, 430, 500, 501, 64 Copyright © 2006 Polycom, Inc. Administrator's Guide - SoundPoint® IP / SoundStation® IP Features 600 and 601). A message-waiting signal from a voice mail server will trigger the message-waiting indicator to flash. Configuration file: sip. cfg For one-touch voice mail access, enable the "one-touch voice mail" user preference. · Configuration file: phone1. cfg For more information, refer to 4. 6. 1. 4 User Preferences <user_preferences/> on page 98. Central (boot server) For one-touch voice mail access, choose to bypass instant messages to remove the step of selecting between instant messages and voice mail after pressing the Messages key on the SoundPoint® IP 500, 501, 600 and 601 (instant messages are still accessible from the Main Menu). On a per-registration basis, specify a subscribe contact for solicited NOTIFY applications, a callback mode (self callback or another contact), and the contact to call when the user accesses voice mail. · For more information, refer to 4. 6. 2. 5 Messaging <msg/ > on page 159. Web Server (if enabled) For one-touch voice mail access, enable the "one-touch voice mail" user preference and choose to bypass instant messages to remove the step of selecting between instant messages and voice mail after pressing the Messages key on the SoundPoint® IP 500, 501, 600 and 601 (instant messages are still accessible from the Main Menu). Navigate to: http://<phoneIPAddress>/coreConf. htm#us On a per-registration basis, specify a subscribe contact for solicited NOTIFY applications, a callback mode (self callback or another contact) to call when the user accesses voice mail. Navigate to: http://<phoneIPAddress>/reg. htm Changes are saved to local flash and backed up to <Ethernet address>-phone. cfg on the boot server. These changes will permanently override global settings unless deleted through the Reset Local Config menu selection. Local Local Phone User Interface None. Copyright © 2006 Polycom, Inc. 65 Administrator's Guide - SoundPoint® IP / SoundStation® IP Features 3. 6. 2 Multiple Registrations SoundPoint® IP phones support multiple registrations per phone and the SoundStation® IP 4000 supports a single registration. The SoundPoint® IP 300 and 301 support a maximum of two registrations, the SoundPoint® IP 430 supports two, the SoundPoint® IP 500 and 501 support three, the SoundPoint® IP 600 supports six, and the SoundPoint® IP 601 supports 12. Up to three SoundPoint® IP Expansion Modules can be added to a single host phone increasing the total number of buttons to 48 registrations. Each registration can be mapped to one or more line keys (a line key can be used for only one registration). The user can select which registration to use for outgoing calls or which to use when initiating new instant message dialogs. Configuration file: sip. cfg Specify the local SIP signaling port and an array of SIP servers to register to. For each server specify the registration period and the signaling failure behavior. · Configuration file: phone1. cfg For more information, refer to 4. 6. 1. 1. 1 Local <local/> on page 85 and 4. 6. 1. 1. 2 Server <server/> on page 85. Central (boot server) For up to twelve registrations, specify a display name, a SIP address, an optional display label, an authentication user ID and password, the number of line keys to use, and an optional array of registration servers. The authentication user ID and password are optional and for security reasons can be omitted from the configuration files. The optional array of servers and their associated parameters will override the servers specified in sip. cfg if non-Null. · For more information, refer to 4. 6. 2. 1 Registration <reg/ > on page 149. 66 Copyright © 2006 Polycom, Inc. Administrator's Guide - SoundPoint® IP / SoundStation® IP Features Web Server (if enabled) Specify the local SIP signaling port and an array of SIP servers to register to. [. . . ] Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. [. . . ]