User manual POLYCOM READIMANAGERSE200

[. . . ] Polycom ReadiManager SE200 Administrator's Guide Version 1. 0. 1 August 2006 PN: DOC2127B Polycom ReadiManager SE200 Administrator's Guide Copyright © 2006 Polycom, Inc. Polycom Headquarters: 4750 Willow Road, Pleasanton, CA 94588 (T) For North America only: 1. 800. POLYCOM (765. 9266) (T) For North America, Latin America and Caribbean +1. 925. 924. 6000, (F) +1. 925. 924. 6100 Polycom EMEA: 270 Bath Road, Slough, Berkshire SL1 4DX (T) +44 (0)1753 723000, (F) +44 (0)1753 723010 Polycom Asia Pacific: Polycom Hong Kong Ltd. , Rm 1101 MassMutual Tower, 38 Gloucester Road, Wanchai, Hong Kong (T) +852. 2861. 3113, (F)+852. 2866. 8028 No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Polycom, Inc. Under the law, reproducing includes translating into another language or format. retains title to and ownership of all proprietary rights with respect to the software contained within its products. [. . . ] For more information, see "Conference on Demand" on page 9-10. Note: Only Polycom MGCs support Conference on Demand. Table 5-14 Field Service Type Enable Available for New Groups Fields in the Service Editor Screen: Conference on Demand Description Name of the service (read only). The service is available for new user groups. 5­28 Video Call Routing Setup Table 5-14 Field Description Fields in the Service Editor Screen: Conference on Demand (continued) Description Description of the service (read only). Conference on Demand. Service Prefix Service Type MGC Properties Login ID User login for the MGC. Note: This user account must be authorized to create new conferences. Password Password for the MGC. Note: Each time you modify the password for the MGC, you must also modify it in this screen. H. 323 Network Service Set on the MGC. Default Conference Properties Video Session Indicates what users see. Available settings are Continuous Presence, Video Switching, and Transcoding. Note: The initiator of a Conference on Demand call may use a higher or lower bit rate than is specified in this screen. Service Editor: Simplified Dialing Simplified dialing is a service that allows end users to access gateway services by dialing 9, and then the phone number or other dialing string. To use simplified dialing, the following settings are also required: · · · · Sites must specify the country code, city and area code, and number of digits in the subscriber line. The gateway must be registered with ReadiManager and display in the List of Devices screen. The LCR table must be defined. 5­29 Polycom ReadiManager SE200 Administrator's Guide Table 5-15 Field Fields in the Service Editor Screen: Simplified Dialing Description Name of the service (read only). The prefix for this service: 9 (read only). Service Type Enable Available for New Groups Description Service Prefix Service Editor: Gateway Service You must define a gateway service for each bit rate available. These services should appear automatically in the list when the gateway registers with ReadiManager. If the List of Services screen does not include gateway services, alternate routing and least-cost routing are disabled. For details, see Table 5-16. Table 5-16 Field Service Type Enable Available for New Groups Description Service Prefix Fields in the Service Editor Screen: Gateway Service Description Type of service. Must be a registered E. 164 alias for the corresponding gateway in the Devices screen for Directory Setup. For use in simplified dialing Device Capability Specifies the type of connection the device can handle. Supports a protocol other than H. 320 or voice, such as H. 321 or video over ATM. The maximum rate at which the calls can connect. Note: If you select Unknown, this service cannot support simplified dialing. 5­30 Video Call Routing Setup Table 5-16 Field Fields in the Service Editor Screen: Gateway Service (continued) Description Specifies the character to insert in the dial string between the prefix and the first number. For example, if you specify * as the character, the sequence the user enters would be: 77*2125551212 Insert between prefix and first number Insert between phone number Specifies the character to insert in the dial string between phone numbers. For example, if you specify # as the character to separate numbers, the sequence the user enters would be: 77*5551212#5651213 Append after full dial string Specifies the character to append after the full dial string. To process the call, certain gateways require a symbol be appended after the final dialing number. For example, if you specify ** as the characters to append after the final dialing number, the sequence the user enters would be: 77*5551212#5651213#2223232** Warning: ReadiManager does not recognize dial strings that require termination after the ISDN number and have an extension after the terminated ISDN. [. . . ] SBC (Session Border Control) A device that specifies call routing through the Internet for a site. Scheduler A role that assigns the permission to schedule conferences through ReadiManager. A site may have multiple gateways to connect the IP network to the PSTN network. In ReadiManager, a site is a physical area, such as a campus, in which many endpoints are located. [. . . ]