User manual POLYCOM PTB400

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual POLYCOM PTB400. We hope that this POLYCOM PTB400 user guide will be useful to you.


POLYCOM PTB400 : Download the complete user guide (231 Ko)

You may also download the following manuals related to this product:

   POLYCOM PTB400 REV C (567 ko)

Manual abstract: user guide POLYCOM PTB400

Detailed instructions for use are in the User's Guide.

[. . . ] The handset is placed in the front compartment and a single spare Battery Pack may be placed in the rear slot. Either slot can be chosen to take priority (the first Battery Pack placed into either slot is charged first) so that the handset is always ready for use. Full charging is accomplished in approximately two hours for each Battery Pack. [. . . ] Set up the Link Dual Charger by placing it on a flat, horizontal surface in order to ensure proper contact with the Battery Pack contacts. Connect the power supply to the charger and plug the power supply into an appropriate wall outlet. The LEDs will light only when a handset or Battery Pack is inserted into the slots. To remove the Battery Pack from the handset, slide the Battery Pack down and off while pressing the Battery Pack release button on the back of the handset. To replace the Battery Pack, align the top of the Battery Pack with the arrows on the label on the back of the handset. Gently press and slide the pack toward the top of the handset until it snaps in place. The user must end any call in progress by pressing the END key on the handset before placing the handset into the charger. The call will not automatically terminate when the handset is placed in the charger. The Battery Pack and handset will only fit into the charger compartments one way. The Link Dual Charger may occasionally need to be cleaned to maintain appearance and ensure battery contact. Wipe the surface with a clean, water-dampened cloth or paper towel to remove most films or residues. If the soiling is too stubborn for plain water, a mild detergent solution may be used. Be sure to wipe away any detergent residue with a plain water dampened cloth. The battery contacts may be cleaned with isopropyl (rubbing) alcohol applied with a cotton swab, cloth or paper towel. [. . . ] The Link Dual Charger will only successfully charge NiMH Battery Packs with a YELLOW label on the handset contact side. Older Battery Packs with a GREEN label will not charge in the Link Dual Charger. If the indicator light is flashing with a Battery Pack or handset in the slot, check to make sure the Battery Pack has a YELLOW label. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE POLYCOM PTB400




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual POLYCOM PTB400 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.