User manual POLYCOM MONTAGE-PRISM 6.1.0.4 RELEASE NOTES

[. . . ] Montage/Prism 6. 1. 0. 4 Release Bulletin & Installation Notes Read this Release Bulletin for the latest information about Release 6. 1. 0. 4 This document introduces version 6. 1. 0. 4 and provides directions for installing Version 6. 1. 0. 4 MCS software. [. . . ] ConferenceTalk will no longer let you delete the lecturer site in a lecture-mode continuous-presence conference. An error will now be returned. · · In a ConferenceTalk continous-presence lecture-mode conference in which all four quadrants are assigned, you can now add additional sites to the conference. The number dialed in the event log will also show # as part of the phone number. · · The lecturer in a CP-lecture mode conference will now receive video from appropriate endpoints upon reschedule of a successful CP-lecture mode conference. Installing Version 6. 1. 0. 4 This section provides the following procedures for updating your 6. 1 MCS software: NOTE: Before you install software, unschedule any conferences that are likely to begin while you are installing this upgrade. Insert the Software Disk 1 of 2 in the diskette drive, and type the following command from the Workplace Shell window: A:\INSTALL 3. When the installation is complete, check Help -> About to verify that your MCS software version has been updated to 6. 1. 0. 4. Insert the Software Disk in the diskette drive, and type the following command from the Workplace Shell window: A:\UNINSTAL 2. [. . . ] Check Help -> About to verify that the MCS SW is uninstalled and left at the original version. [. . . ]