User manual POLYCOM HDX SYSTEMS 3.0 RELEASE NOTES 12-2010

[. . . ] Release Notes Polycom® HDX® Systems, Version 3. 0 Polycom announces the latest release of Polycom® HDX® hardware and software. This document provides the latest information about the Polycom HDX systems and version 3. 0 software. For more information about using the features described in this document, refer to the product documentation available at www. polycom. com/videodocumentation. When making a connection from a web browser to configure the Polycom HDX system, always enter the address of the Polycom HDX system in one of the following formats: https://hostname or https://10. 11. 12. 13. If Security Mode is enabled on your system, you must use secure HTTPS access (for example, https://10. 11. 12. 13). [. . . ] Place the call again. Interoperability Microsoft Users might have trouble using Internet Explorer to access the web interface, but have no such trouble when using Mozilla Firefox. VIDEO-80679 2. 6 When a Polycom HDX system is configured for integration with Microsoft Office Communications Server and is in a point-to -point 2M SIP call, the call disconnects after approximately 10 hours. Polycom, Inc. 41 Release Notes Polycom HDX Systems, 3. 0 Category Interoperability Microsoft Issue ID VIDEO-61286 Found in Release 2. 0. 1 Description When People Video Adjustment is set to Stretch on a Polycom HDX 8000 HD system in a call with Microsoft Office Communicator, Office Communicator displays black video. The Office Communications Server should be configured to allow no more than 200 contacts (this is the default setting). If the Office Communications Server allows more than 200 contacts and more than 200 contacts are in the directory, the Polycom HDX system may show up to 200 contacts, or none. If there is a meeting password configured for a multipoint meeting hosted on a Polycom HDX system, Microsoft Office Communicator clients cannot join the meeting. Occasionally, if three Office Communicator clients simultaneously call a Polycom HDX system hosting a multipoint call, the Polycom HDX system restarts. The user interface of a Polycom HDX system hosting a multipoint call may experience reduced response when in a high-bandwidth, 5-way federated Interactive Connectivity Establishment (ICE) call. Polycom HDX systems do not support presence in federated ICE calls. Workaround None VIDEO-81020 2. 6 None VIDEO-82848 2. 6. 1 None VIDEO-84365 2. 6. 1 None VIDEO-83849 2. 6. 1 Reduce the call bandwidth used to place the call, or use a Polycom RMX system to host the multipoint call. VIDEO-84732 2. 6. 1 None 42 Polycom, Inc. Release Notes Polycom HDX Systems, 3. 0 Category Interoperability Microsoft Issue ID VIDEO-84717 Found in Release 2. 6. 1 Description During a federated Interactive Connectivity Establishment (ICE) call between an Office Communicator client and a Polycom HDX system, the Office Communicator client disconnects from the Polycom HDX system after approximately three hours. A Polycom HDX system hosting a multipoint call with five or more endpoints may restart if the call is encrypted and using ICE. Workaround Place the call again, or place the call between two Polycom HDX systems. VIDEO-84628 2. 6. 1 Do one of the following: · Use a Polycom RMX system to host the multipoint call. Place the calls to the Polycom HDX system hosting the multipoint call at 384 kbps or lower. · VIDEO-85242 2. 6. 1 If you experience connectivity issues with federated voice or video, check the Polycom web site for updates and notifications, and verify that you have the latest software version. Polycom continues to run tests between various Office Communications Server federated environments. These environments are highly complex and customized with different firewall software, settings, and versions. Polycom is committed to updating support for new environments in future releases. None VIDEO-86180 3. 0 Internet Explorer version 8 shares cookies among all active sessions. If you manage multiple HDX systems within the same Internet Explorer 8 browser session, you might encounter unexpected behavior. When using Internet Explorer 8, do one of the following: · · Manage only one HDX system at a time. Use the -noframemerging option in each new instance of Internet Explorer for each system. Polycom, Inc. 43 Release Notes Polycom HDX Systems, 3. 0 Category Interoperability Microsoft Issue ID VIDEO-86863 Found in Release 2. 6. 1 Description Calls between the HDX system and Office Communicator lasting longer than one hour might spontaneously disconnect. Microsoft Office Communicator clients incorrectly display the presence status of an HDX system as "audio only. " When an HDX system is registered to a Microsoft Office Communications Server or Microsoft Lync Server, the system indicates that it can receive instant messages even though it cannot. Multipoint directory entries with speed configured for Auto will be placed at the maximum rate supported by the calling system. In some cases, this may be greater than the rate supported by the network. Workaround Redial the call. VIDEO-86859 3. 0 None VIDEO-88120 3. 0 None VIDEO-88126 3. 0 None Interoperability PathNavigator TM VIDEO-53371 1. 0 Do one of the following: · Configure the directory entry for the desired speed, rather than leaving it as Auto. Configure your gatekeeper to downspeed call requests to a rate that the network supports. · VIDEO-60656 2. 0 Set Use PathNavigator for Multipoint Calls to Always if you want to automatically use the Polycom PathNavigator Conference on Demand to place multipoint calls. When using PathNavigator Conference on Demand to place multipoint calls to Polycom VSX systems using ISDN, the conference may connect with audio only. Polycom MGC 9. 0 resolves this issue. None VIDEO-60602 2. 0 None 44 Polycom, Inc. Release Notes Polycom HDX Systems, 3. 0 Category Interoperability Polycom Converged Management ApplicationTM (CMA®) Desktop (CMAD) Issue ID VIDEO-80757 Found in Release 2. 6 Description Polycom CMAD displays confusing information when a Polycom HDX system has been added as a buddy, Polycom CMAD is configured with no camera, and Enable Call without a Camera is disabled. The Polycom CMAD displays the correct presence status (for Polycom CMAD) -- the Polycom HDX system is unavailable. But when you select the Polycom HDX contact and view its details, Polycom CMAD shows the Polycom HDX contact is online and call capable. [. . . ] The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www. openssl. org/)" THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. [. . . ]