User manual POLTI VAPORETTO 3 CLEAN

[. . . ] The optional accessories are on sale at all the best domestic appliance retailers, an Authorised Polti Service Centre or online at www. Uk and in good appliance shops you will find a wide range of accessories to increase the performance and the practical Applications of your appliances to make home cleaning even easier. To check the compatibility of an accessory with your appliance, Uk or call our Customer Services department to register your product. You can benefit from a special welcome offer, in participating countries, and keep up to date on all the latest Polti news, as Well as buy accessories and consumables. [. . . ] Connect the handle to the main part and replace the screw with a suitable screwdriver (2). 4 Connect the nozzle, with the cloth attached to the brush (3) (only for steam cleaning). 1 Unwind the power cable completely and connect it to an appropriate socket (4) that is earthed. Release the brush from its position, place a foot on the brush and tilt the handle (6). During cleaning, it is possible to insert the power cable into the upper hook to avoid it getting in the way (7). 1 Remove the water tank from the appliance, pressing the side buttons and pulling outwards (8). Open the cap of the tank by pulling it outwards (9), then fill the tank with water. Before using the appliance on delicate surfaces, ensure that the area in contact with the surface is free from foreign bodies that could cause scratches. Polti Vaporetto 3 Clean / 3 Clean_Blue is a combined product that can be used as a vacuum cleaner, a steam upright, to wash and sanitise floors or in combined steam upright mode with a suction action to save on cleaning time. SUCTION ONLY Ensure that Section 1 has been followed and proceed as described in Section 2. 1 Adjust the steam intensity based on the type of floor (13); for hard floors (tiles, ceramic surfaces, etc. 2 Release the appliance from its position, place a foot on the brush and tilt the handle (6), then press the steam button (23) on the handle, and begin cleaning moving the brush back and forth. 3 The brush has a flexible joint that makes it easy to clean corners and edges of furniture and walls. COMBINED MODE: STEAM / SUCTION The combined use of steam and suction allows the dust to be removed and the floor to be sanitised in a single stroke. During cleaning, it is possible to insert the power cable into the upper hook, to avoid it getting in the way (7). During cleaning operations, the use of the Cloth allows the floors to be washed and sanitised so that the dirt loosened by the steam is collected by the cloth. Before removing the cleaning nozzle with the cloth from the brush, wait a few minutes to allow the cloth to cool. Then place a foot on one of the two lateral pins of the nozzle and pull the steam upright upwards. WARNING: For steam cleaning, do not use the brush without the nozzle with the cloth. WARNING: For additional safety, test steam delivery prior to use on a hidden part, leave the steamed part to dry to ensure that no changes in colour or deformation have occurred. WARNING: To clean glass surfaces during cold weather, preheat the windows starting to steam from a distance of about 50 cm from the surface. 1 Connect the flexible hose to the Portable Steam Cleaner, then attach the upholstery accessory and the cleaning nozzle (see point 5. [. . . ] Disconnect the appliance from the mains, fill the water tank and then use the appliance. Check that the appliance is connected to the power and that the steam ON/OFF switch is held down. Press the steam adjustment button to increase the steam being dispensed (see section 4). If necessary, momentarily stop the disbursement of steam, while continuing to brush the surface. [. . . ]