User manual POLTI VAPORETTO 1030 *UL*

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual POLTI VAPORETTO 1030 *UL*. We hope that this POLTI VAPORETTO 1030 *UL* user guide will be useful to you.


POLTI VAPORETTO 1030 *UL* : Download the complete user guide (231 Ko)

Manual abstract: user guide POLTI VAPORETTO 1030 *UL*

Detailed instructions for use are in the User's Guide.

[. . . ] Do not refill the tank while it is still hot, allow it to cool down for a few minutes before refilling. Never empty VAPORETTO when the water inside the generator tank is still hot. Do not touch the appliance with wet hands and feet whilst the appliance is connected to the mains. Never leave the appliance unattended whilst it is connected to the mains. [. . . ] Check that the connector button has engaged and the accessory is fully connected. Fig. 6 « « « ENGLISH PAT E N T E D S A F E T Y C A P / ' WAT E R O U T ' All POLTI machines are equipped with the unique Polti patented safety cap, which prevents opening of the generator tank as long as there is any pressure remaining inside the tank. This is an important and indispensable safety device, and it is necessary to follow certain procedures when re-filling the tank. According to model, `water out' is indicated by a warning light (J), or by an audible alarm signal from the machine, or on more basic models by the exhaustion of the steam output. Whenever you have used up all the water in the tank, follow the following procedures: 1b. Press the steam request lever (3) on the hand gun (2) so as to fully exhaust the steam supply from the tank. When cool proceed to carefully refill the tank as described in paragraph 1 of the section "Preparation for Use" in the instructions. If refilling the generator when not completely cooled, we recommend that you carefully pour only very small quantities of water at each pouring into the tank, so as to avoid spitting from the tank and cover exposed skin whilst filling. USE OF THE PROFESSIONAL STRENGTH PRESSING IRON (normally sold separately) 1d. Connect the connector block at the end of the iron hose (4) to the generator as shown in point 2a of the section "Instruction for Use". For all steam ironing, position the temperature indicator dial (F) to the position "COTONE - LINO". For dry ironing set the temperature control dial according to the fabric to be ironed as indicated on the dial. Wait three to four minutes for the indicator (R) to go out indicating that the sole plate of the iron has reached the correct temperature. Press the steam request button on the iron (R) to allow the steam to exit. At first you may find that the steam contains some water globules and we recommend that the first jet of steam is therefore played onto an old cloth, and is not directed onto the garment to be ironed. In order to have a continuous steam jet, move the button (U) forwards. IMPORTANT · Do not leave the iron unattended whilst connected to the mains. · Iron only on heat resistant surfaces and on surfaces that allow the steam to escape e. g. mesh ironing boards. ENGLISH CAUTIONS · When cleaning electric ovens, refrigerators, or other electrical equipment, always disconnect the electrical item to be cleaned from the mains before cleaning. · For cleaning leather, wood or delicate fabrics especially dralon, velvet and other pile surfaces, consult the manufacturers instructions. Clean only by using the hand gun at a safe distance together with a soft cloth and always do a test on a non visible part of the item first or on a sample. Allow the test area to dry completely before observing results and effects on surface or colour before proceeding to clean further areas, ensuring that exactly the same distance and technique are applied as for the test area. If in doubt, and on sensitive surfaces like fabrics, leather and wood it is always better to ask advice from your Steam Cleaner dealer. [. . . ] · If repairs or replacement parts are required, use only original Polti replacement parts. · The appliance is fitted with a safety thermostat, which should only be replaced by an authorised technician. · If it is necessary to replace the power supply cable, please refer to the nearest Polti authorised service centre, since the use of a special tool is necessary. GUARANTEE The Vaporetto is guaranteed to the original purchaser for one year from purchase date against manufacturing or raw material defects. The guarantee is not valid if the appliance has been misused in any way. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE POLTI VAPORETTO 1030 *UL*




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual POLTI VAPORETTO 1030 *UL* will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.