User manual POLTI TRIS AROMA

[. . . ] Do not use the appliance if the power cable or other important parts are damaged. Do not use electric extension leads that are not authorized by the manufacturer, as they may cause damage or fire. If it is necessary to replace the power supply cable, please refer to the nearest Polti authorised service centre, since the use of a special tool is necessary. Never touch the appliance with wet hands or feet with the cable plugged into the mains. [. . . ] The crossed-out wastebasket symbol on the appliance means that at the end of its useful lifespan, the product must be disposed of separately from ordinary household wastes. The user is responsible for delivering the appliance to an appropriate collection facility at the end of its useful lifespan. Appropriate separate collection to permit recycling, treatment and environmentally compatible disposal helps prevent negative impact on the environment and human health and promotes recycling of the materials making up the product. For more information on available collection facilities, contact your local waste collection service or the shop where you bought this appliance. 27 ENGLISH TRIS AROMA THE CAPSULE SYSTEM The machine is designed exclusively for use with the "Aroma Polti" capsule system. Each capsule contains just the right amount and just the right grind to obtain the best espresso coffee in a few seconds. The wrapper on the capsule is made of polypropylene, an excellent material for use in contact with foodstuff. The capsule system is not only very convenient and easy to use, it guarantees all the freshness and aroma of freshly roasted coffee, so that you can enjoy your favourite blend. Use with capsules other than "Aroma Polti" capsules will result in forfeiture of the warranty. P R E PA R AT I O N · Carefully remove the machine and all its accessories from the pack. · Open the lid, take out the water tank (1) (fig. 1) and rinse it out with clean cold water. · Fill the tank (1) with clean cold water only, put it back into the machine and close the lid. · Plug the power cable (12) into a suitable earthed power outlet. As soon as the appliance heats up to the required temperature, the temperature indicator light (6) will come on. MAKING COFFEE ance, so that it can warm up to the optimal temperature for your selected function. WARNING: The first time you use the appliance, it is important to do a washing cycle using the empty capsules provided as described in the "MAINTENANCE" section. MAKING COFFEE Make sure that the function selector (8) is set to the function you intend to use and wait for the temperature indicator light (6) to come on. You can adjust the height of the coffee dispenser (14) by moving the dispenser height lever (16) up or down to suit the height of the cup you want to use. · Open the capsule compartment door (10) and rest the capsule in the compartment (9), in the position suggested by its shape (fig. 2). · CAUTION: the capsule will automatically be pushed into the compartment when you close the door (10) all the way. To stop dispensing coffee, put the switch back in the "STOP" position. You can make your espresso as long or short as you like by adjusting the amount. · The used capsule will automatically fall into the drawer (11) whenever a new capsule is placed in the compartment (9). Empty the used capsule drawer frequently to prevent capsules from accumulating and blocking the expulsion channel. NOTE: before starting the dispensing device with the switch (7), make sure you have inserted the capsule for the beverage you want to make or an empty capsule if you intend to clean the appliance. [. . . ] · As soon as the temperature indicator light stops flashing, you can make coffee if you set the function selector (8) to the coffee function. Clean the steam/water dispenser (15) after each use as described in the "maintenance" section. IMPORTANT NOTES: · If you have used a function requiring a hot operating temperature and want to use a function requiring a cooler temperature, the temperature indicator light (6) will flash until temperature is appropriate for the selected function. · It is important to turn off the dispenser switch (7) before switching to another function. [. . . ]