User manual POLTI FAV 50 MULTIFLOOR LECOASPIRA

[. . . ] Visit our official Customer Services department to register channel: www. Search the illustrative video for Vaporetto You can benefit from a special welcome Lecoaspira in order to see a quick and offer, in participating countries, and keep easy overview of all the features of this up to date on all the latest Polti news, as amazing appliance. In addition, the video guide will lead you To register your product, in addition to through use of the Vaporetto Lecoaspira your personal information, you must enter from preparation for use to simple the serial number (SN) which you will find maintenance operations. On the silver label, located on the box and Sign up to the official channel to keep underneath the appliance. [. . . ] Attach it to the universal brush (2) (see page 5) before starting to clean the surface. Before removing the cloth from the brush, wait a few minutes to allow the cloth to cool. CONNECTION OF ACCESSORIES (see page 4) All the Vaporetto Lecoaspira accessories can be connected directly to the flexible steam/vacuum hose or to the extension hoses. 4 (see page 5) Turn on the boiler by pressing the boiler button and adjust the strength of the steam using the steam adjustment dial (to turn the boiler off press the boiler button again); for this type of surface we recommend steam level 1/2. The steam indicator light ( ) will start flashing and continue until the correct temperature has been reached. WARNING: For additional safety, test steam delivery on a hidden part, leave the steamed part to dry to ensure that no changes in colour or deformations have occurred. 5 Deactivate the steam lock and continue with the steam delivery and suction, pressing the steam trigger on the handle, and the suction button on the appliance. The cloth will remove the dirt and the steam with sanitise the surface. 6 Alternatively, the Multifloor Function can be used by pressing the boiler button again when the steam indicator light ( ) is constant (see Chapter 10). Before removing the cloth from the brush, wait a few minutes to allow the cloth to cool. Alternatively, the Multifloor Function can be used by pressing the boiler button again when the steam indicator light ( ) is constant (see Chapter 10). ) WARNING: Before cleaning leather or fabrics with steam, consult the manufacturer’s instructions and always carry out a test on a hidden part or on a sample of the material. Allow the steamed part to dry to make sure that no changes in colour or deformations have occurred. Make sure that you have prepared the appliance following the instructions listed in Chapter 1 and connect the accessories listed in Chapter 2. 1 For suction only, connect the nozzle for frames (7) to the | 27 | LECOASPIRA FAV50 - M0S11128 - 1P04:UNICO 08/05/2015 16. 30 Pagina 28 handle (1) and press the suction button on the appliance to proceed with the cleaning operations. To adjust the suction power, hold the suction button down (the suction indicators will start to light up) until the desired suction level is reached. For safety reasons, engage the steam lock on the handle during vacuuming. 2 For steam cleaning and suction use the nozzle for frames (7) with the cap (9) attached and connect it to the handle (1) or to the extension tubes (3) (see page 5). 3 (see page 5) Turn on the boiler by pressing the boiler button and adjust the strength of the steam using the steam adjustment dial (to turn the boiler off press the boiler button again); for this type of surface we recommend steam level 1/2. The steam indicator light ( ) will start flashing and continue until the correct temperature has been reached. 4 It is possible to use the suction and steam features either together or by alternating them, activating both as described in the previous points. [. . . ] 3 Lift the release lever of the HEPA filter and remove it from its housing. 4 Rinse the HEPA filter using running water only and shake gently to remove any excess dirt or water residue; before replacing the filter in the appliance, leave to dry naturally away from direct light and heat for at least 24 hours. SOLUTION Check that the appliance has been disconnected from the mains, as indicated in Section 1. HEPA filter is blocked or dirty The appliance is pressurized but little The steam adjustment handle is on Turn the steam adjustment handle to increase steam comes out. [. . . ]