User manual POLTI AS 519 FLY

[. . . ] Do not use the appliance if the power cable or other important parts are damaged. Do not use electric extension leads that are not authorized by the manufacturer, as they may cause damage or fire. If it is necessary to replace the power supply cable, please refer to the nearest Polti authorised service centre, since the use of a special tool is necessary. Never touch the appliance with wet hands or feet with the cable plugged into the mains. [. . . ] CORRECT USE OF THE PRODUCT This appliance is intended for home use for vacuuming solids as described and in accordance with the instructions provided in this manual. Please read these instructions carefully and keep them, as you may find them useful in future. Polti declines liability for any damage or accident derived from any use of this appliance which does not comply with the instructions contained in this booklet. AT T E N T I O N Directive 2002/96/EC (Waste Electrical and Electronic Equipment - WEEE): information for users This product complies with EU Directive 2002/96/EC. The crossed-out wastebasket symbol on the appliance means that at the end of its useful lifespan, the product must be disposed of separately from ordinary household wastes. The user is responsible for delivering the appliance to an appropriate collection facility at the end of its useful lifespan. Appropriate separate collection to permit recycling, treatment and environmentally compatible disposal helps prevent negative impact on the environment and human health and promotes recycling of the materials making up the product. For more information on available collection facilities, contact your local waste collection service or the shop where you bought this appliance. FUNCTIONING · Unroll the supply cable (11) till reaching the yellow sign on the cable itself, by pulling it as shown in fig 1. · Insert the suction opening on hose (D) into connection (5) (fig. The ON/OFF switch (7) can also be operated by touching it with your foot, so you do not have to bend. · It is possible to regulate suction power through the slide cursor (9). Moving the cursor forward, the power increases, moving the cursor backwards the power decreases. We recommend minimum power for curtains, medium-low power for sofas, armchairs and cushions, medium-high for carpets and high for floors and hard surfaces (ceramics, marble, etc. ). · Thanks to the manual suction regulator (C2), the suctioning power can be changed according to the cleaning task, and it allows you to stop promptly in case of accidental suctioning (e. g. To suction again at maximum power, move the regulator backwards till it covers the hole. E M P T Y I N G A N D C L E A N I N G T H E D U S T C O N TA I N E R · Switch off the appliance (7). · Disconnect the flex hose (D) from the appliance, by pressing button (C1) and pulling out the hose. · Press the button to detach the dust container (4) on the top lid (3) (fig. 3). · Press the button (2a) on the handle (2) to open the container and get rid of the collected dirt (fig. 4). · ATTENTION: when pressing the button (2a), the underside of the container opens automatically, so we recommend to empty the container over a rubbish bin. [. . . ] To attach the hose to the appliance, slide the hook (G) on the hose into the accessories holder slot on the appliance (Fig. 6). GENERAL MAINTENACE Always make sure the appliance is unplugged before performing maintenance work of any kind. Replacement and cleaning of the Hepa-type filter (12) and the filter body with fine mesh (13) · Remove the dust container (1) as described in the paragraph "Emptying and cleaning of the dust container". · Remove the filter from the container and separate it as shown in fig. 7. · Let the filters dry naturally, away from light and heat sources. [. . . ]