User manual POLK AUDIO S8

[. . . ] If the speaker is already in the wall, carefully hook the grille with a bent paper clip and pull it gently away from the frame [figure 6]. When painting the frame of the speaker, use the supplied paint masks to carefully mask off the front of the speakers to protect the drivers and baffles while painting. You can do this while the speaker is already installed in the wall (if, for instance, you're repainting the room). If you do not have the paint masks, carefully mask the speaker components using paper and masking tape. [. . . ] The special fabric scrim hides the speaker's drivers from view, and will not interfere with the sound. INSTALLATION Out of the box and into the wall, that's how easy it is to install Polk TCi Series In-Wall Loudspeakers. If you intend to do the installation yourself we recommend that you possess some skill in the proper use of hand and power tools. You should have a thorough understanding of local building and fire codes and a familiarity with the area behind the wall or ceiling into which you plan to install your speakers. Use at least 18 gauge wire or heavier for the utmost in sound quality. If you are in doubt that you possess the necessary skills or tools, consult your Polk Audio dealer, or a professional installer. Keyhole saw, utility knife or material--appropriate incising implement for cutting drywall or other wall material. ⷠPower drill with appropriate bit (optional, for starting wall cut). Make sure the material into which you plan to mount the speakers (plaster, drywall, paneling, stone, etc. ) can support the weight of the speakers (see specification page for the weight of your model). ⷠMake sure the locations you select do not conceal studs, electrical wiring or plumbing. Polk Audio loudspeakers and subwoofers are capable of playing at extremely high volume levels, which could cause serious or permanent hearing damage. Accepts no liability for hearing loss, bodily injury or property damage resulting from the misuse of its products. Keep these guidelines in mind and always use your own good judgment when controlling volume: · High volume in an automobile can hinder your ability to safely operate a vehicle. ⷠYou are responsible for knowing the local laws governing acceptable mobile volume levels. SAFETY FIRST When installing your TCi Series In-Wall Loud-speakers, be aware of the weight of your particular model (see specification page for the weight of your model) and the sturdiness of the material into which you are installing the speaker. Also be aware of any concealed studs, electrical wiring or plumbing in the wall or ceiling into which you are installing the speakers. If you are not sure of a safe way to install these speakers, consult a professional installer, your authorized Polk Audio dealer, or a building contractor. If you plan to install your TCi Series speakers where water will directly contact them, it is advisable to use a silicone sealant or caulk between the frame of the speaker and the wall surface. This seal should prevent water from getting behind the loudspeaker and possibly damaging the wall surface. Do not position the speaker where water can pool on the surface of the woofer cone or tweeter dome, as this will great decrease the speaker's useful life (and everything will sound--glub!This warranty will terminate automatically prior to its stated expiration if the original retail purchaser sells or transfers the Product to any other party. [. . . ] Products replaced or repaired under this warranty will be returned to you, within a reasonable time, freight prepaid. This warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, cosmetic appearance of cabinetry not directly attributable to defect in materials or workmanship, or service, repair, or modification of the Product which has not been authorized or approved by Polk Audio. This warranty shall terminate if the Serial number on the Product has been removed, tampered with or defaced. If this Product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replacement as provided above. [. . . ]