User manual POLK AUDIO RM5300

[. . . ] Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. [. . . ] Outdoor installation or Indoor Wall Mounting The antenna can also be attached vertically to an external or internal wall if that is more convenient than placing it on a horizontal surface. Holding your antenna up, find a wall location that ensures a strong signal. It is recommended that you use an extension cord to temporarily locate your High-Gain Home Antenna outdoors while optimizing the antenna location with the "Antenna Aiming" screen. Use screws with head sizes small enough to fit in the center of each of the four holes but large enough not to pop out of the elongated sections. Leave 1/8-inch of the screw shanks behind the heads sticking out of the wall. Tilt the antenna fully back on the base, place the antenna base on the four screw heads with the antenna pivot at the top and pull down approximately 1/4" inch until the base is firmly secured. Tilt the antenna away from the wall/base until the signal strength is optimized. nOTE: Do not cut the antenna cable and attempt to splice it or attach alternative connectors or cable. The cable and connectors used in your XM Reference Tuner are specifically chosen and attached at the factory to ensure that they will work with XM's unique frequency band. Use an XM-approved extension kit (Polk Audio model number XAE-1, available from your retailer or http://shop. To quickly begin enjoying XM Satellite Radio in your home, follow these simple steps: 2. If A or B appears, press the PRESET/DIRECT button on the remote control until the display says "DIRECT. select Channel by Channel Presets Your XM Reference Tuner can store up to 20 Preset channels. They are organized into two different groups (or memory banks), Preset A and Preset B, each with 10 channels corresponding to the 10 Number Keys. Press PRESET/DIRECT until A or B appears in the upper right corner of the display. Press DISPLAY to display the channel name, artist name or song title for each preset. Your XM Reference Tuner will remember if you were in the preset section of the category search so that the next time you press a Category key (< and >) it will immediately display the information on those preset channels. Enlarging Display Text Your XM Reference Tuner display can be reconfigured to be more readable from a across the room. Press DISPLAY while on a normal play screen to switch to larger-text channel number configuration. Press DISPLAY a second time to continuously scroll the artist and song title information across the display in large-sized text. Save And Recall Artist Name And Song Title You can save the artist name and song title on the current channel for future reference. Up to 10 different artist names/song titles can be saved at once, after which any new information that is saved will replace the oldest information in the memory. [. . . ] Subscription Issues If you still need assistance, contact XM Satellite Radio by calling 1-800-XM-RADIO (1-800-967-2346). Care And Feeding of Your XM Reference Tuner Use only a soft dry cloth to clean cabinet of your XM Reference Tuner. Do not use any solvents, chemicals or cleaning solutions containing alcohol, ammonia or abrasive. Keep your XM Reference Tuner out of direct sunlight or other sources of extreme heat. [. . . ]