User manual POCKETWIZARD LOW VOLTAGE TRIGGER-MINIPHONE

[. . . ] LVT-M Low Voltage Trigger -- Miniphone manufactured by LPA Design User's Manual LVT-M Operation Guide Purpose · Use with high voltage strobe packs and low voltage electronic triggering devices · Safely parallel different packs · Prevent damage to many cameras PocketWizard's Low Voltage Trigger makes working with high voltage strobes safe and reliable. Make your strobes compatible with more triggering devices and with each other. [. . . ] You can usually tell the polarity of the Zip cord from a small stripe or ridge that runs the length of the zip cord. Plug a household to miniphone cord into the Add-A-Taps the same way at each location. The battery should last for approximately 200, 000 shots of normal duration. If it becomes necessary to replace the battery, it may be returned to the factory for a new battery. However, to insure continued reliability, please follow these guidelines: · · · · Do not subject the unit to high mechanical shock (don't drop it!) Damage may occur to some components if the LVT is stored below -20°C (-4°F) or above +85°C (185°F). Do not connect any device to this unit unless that device is approved for use by PocketWizard. Connection to unapproved devices may cause damage and will void your warranty. To clean the LVT, use a lightly dampened cloth to wipe the exterior surfaces. Do not immerse the unit in any liquid. · Technical Information The delay between sync-in and sync-out is . 00002 Sec. If a radio slave is used, you will be limited by the speed of the radio slave. [. . . ] If the pack still does not fire, make sure the cable going from the Pack to the LVT is OK. If the pack fires without the LVT attached, your pack may be incompatible with the LVT. [. . . ]